Ford  x   >   2017  x   >   !1988  x   >   !Advent Air  x   >   2012  x   >   1996  x   >  

my truck is a f350 Super Duty 4x4 off road 2017, looking for the goose neck/ plus fithwheel puck system under bed | For your 2017 Ford F-350 that has the factory rail kit the best fifth wheel hitch is the B and W Companion part # BWRVK3300....

I have a 2016 ambition with moorryde fifth wheel. It’s a Lippert frame but can’t find any numbers on it that match the 3 numbers you list. Where might I find the numbers. Fifth wheel is rated @ 18,000 pounds. | Thanks for the picture of your...

what is the weight of the step, not the shipping which of course would been close but that i could not find either, you might include those next time. | The weight of the Carr Hide Away Step for Work Trucks # CARR501020 is 30 lbs. It also has...

Would like to purchase the Reese Goose neck Box to replace the Kingpin box on my 202 Keystone Cougar 29RKS. The Lippert Pinbox tag is attached. Is this compatible with the RP94720. The identifiers on the Pinbox tag is Item # 7362711 SN...

switching out house trailer rim and tire to this hub with new brakes assemble looking for rims to fit. The center hole fit tighter, hub to new rim or is that always be gap? | If the center hole of your wheel is larger than the hub bore of...

I ordered the correct brackets for my 2017 f250. I have removed my Q20 and rails from my 2016 f250 but I need instructions to install. Do you know where I can get them? Thanks | The actual position of the bed rails can vary according to which...

Hi I’m looking for a 2 Bike Platform Rack Hitch mounted for my Specialized Hybrid / Fitness Bikes. They are not carbon fiber. We will be going on trips with the bikes so want a stable/secure rack with minimal movement. I like the racks that...

Is there a hitch made that is a single rather than a dual? And what rise would that be? 71/2inch -8? 2012 Ford Flex SE. Just using a cargo carrier only.Thanks. | We don't have any great hitch adapter solutions that you could use to add additional...

I have a 2017 ford f250 XLT short bed diesel. Can I use this on my gooseneck ball already in my truck? Also with my truck being a short bed will this allow enough clearance? I also have bed rails? will these be a problem? | The Demco Recon Gooseneck-to-5th...

Does this require a seal kit sold separate? to install. What part # do you recommend? | You will need to use a sealant when you install the Fan-Tastic roof vent part # FV800900 that you referenced. For that we have the Roof Vent Install Kit...

Can I get a parts illustration with dimensions for this lock assembly to see if it will fit my application ? | There are two different Replacement OEM Bolt Locks for the Extang EnCore Hard Tonneau Cover on your 2012 Ford F-150 depending on when...

I installed Draw-Tite Class III hitch reciver on my 2017 Ford Explorer and I have a MaxxTow MaxxHaul Aluminum Motorcycle carrier. The descriptioin on the carrier said that I can load up 400 lbs bike on the carrier. Is it okay to load 400 lbs...

I am interested in a front receiver . I have a BOSS plow with the SMARTHITCH2 on the truck. It looks like the # 306-X7904 fits on top of the frame, so the plow frame would not be in the way. Do you know if # 306-X7904 would bolt up with out...

Can part SuperSprings Mounting Kit for OEM Leaf Springs Above the Axle Item # MTKT Be used instead of the poly pad on a 2012 ford f150 fx4? | Yes, you can use the SuperSprings Mounting Kit for OEM Leaf Springs Above the Axle part # MTKT on...

Hi, we have a falcon 2 tow bar and a base plate on our ford fiesta. I believe we are missing the driver and passenger side arms. Do you sell these separate from the base? Thanks. | We do offer replacement arms for the Roadmaster base plate...

Lots of great info here ... Thanks. Ive been looking at the B/W Companion for 2017 F350 w/ factory pucks... Thought I had the right solution. I was at the 5th wheel dealer today, and big push to buy Super Ride 6200 by Blue Ox... Im not...

I have a 2012 ford f150 fx4 that has fender flares will these work with fender flares? | The WeatherTech Front and Rear Mud Flaps, part # WT110003-120003, will fit your 2012 Ford F-150 FX4 with factory add-on fender flares. The front mud flaps...

I have a 1996 ford ranger and cannot get the lights to work. Do I need an electronic turn signal converter? | For your 1996 Ford Ranger you would need a trailer wiring harness like the part # 118325 that has a turn signal converter wired into...

I need the Rails for 2017 F-250: i have the hitch Demarco you sell. Can you help? | By Demarco I think you meant Demco, and we do have rails for a fifth wheel hitch that will fit your 2017 Ford F-250. So long as your hitch fits industry standard...

Have a 2012 E350 ford work van, looking for a work style step bumper. Will the #20009 fit and what, if any, mounting kit is required? | We do have a fit for a step bumper for your 2012 Ford van, though it is a different part number than you...

My husband and I do a lot of camping and storage with our kayaks has become cumbersome. I wanted something that was foldable, and this product looks perfect. I have a 2017 F-150 Lariat, and want to be able to transport 2 kayaks on this rack....

Just arrived home after a 3500 Mike trip in 2017 Windsport 28m. Many times throughout the trip the ride was so rough I wondered what wouldn’t work when we arrived at our camp sight. During one specific drive the screws below my drivers seat...

you wouldnt happen to have a Brake Controller Installation for a 1996 Ford Bronco would ya? and any info as to what kind of unit I need would be helpful, proportional or Time Delayed. Im going to be pulling a 24 foot camper with the 96 Bronco...

Hello I have a 2017 F150 and am wanting to purchase what I need for a 7 pin hook up. My truck currently has the factory 4pin hookup. Do I need to purchase anything else for a plug and play hookup? Tekonsha Plug-In Wiring Adapter for Electric...