Exhaust System Recommendation for a 2001 Ford F350 Super Duty
will any of these fit a 2001 ford f350 daully | Yes, if your 2001 Ford F350 has a long bed, crew cab with a diesel engine the MagnaFlow XL Stainless Steel Turbo-Back Exhaust System # MF18951 that you referenced would work for you. If your vehicle...
How to Correct Frozen Locks on Diversi-Tech Ball Mount # DTALBM6600
Do you service Diversi-Tech ALBM hitches? My lock mechanisms are frozen up and will not move. | If you have not already tried a penetrating lubricant like WD-40 or PB Blaster on the frozen lock on your Diversi-Tech Ball Mount # DTALBM6600 this...
Will Rock Tamers or Roadwing Removable Mud Flaps Fit Ball Mount, # DTALBM6600, 2002 Ford F-250
Can you mount Rock Tamers on This ball mount? | I went out to the warehouse and measured the Self-Locking Adjustable Aluminum Ball Mount, # DTALBM6600, so you would be able to determine if you would be able to mount your Rock Tamers or another...
B&W Made in the USA Adjustable Ball Mount w/ 9 Inch Drop
where is this hitch made? | I have another option for you but The Flash Solid Steel Adjustable 2-Ball Mount item # FA49-00-5900 is made in China. For an American made adjustable ball mount I recommend the B&W Tow & Stow 2-Ball Mount item # BWTS10043B....
Locking Diversi-Tech Adjustable Ball Mount Recommendation for a 2012 Ford Super Duty
I need an adjustable 2.5inch mount. But it looks like the diversi-tech 2.5inch is just a 2inch with a sleeve added. Im also concerned with the security of the locking system and rattling. Seems that a side load could cause a pin to pop out of...
Replacement Trunnion Spring Bars for 1,200 lb Fastway Weight Distribution Hitch
Replacement trunnion bars for Fastway 1,200 lb weight distribution hitch. | The replacement trunnion spring bars for the 1,200 lb tongue weight Fastway e2 Weight Distribution with 2-Point Sway Control # FA92-00-1200 come as a pair and are the...
How to Determine Which Fastway e2 Weight Distribution System for 7500 lb Camper
when i was reading the specs it says max tongue weight 600-1000 lbs i was wondering what that means exactly my tongue weight is 800lbs and the camper weight around 7500 lbs dry | In order to choose the correct weight distribution system for...
Does a Trailer Need Just a Breakaway Switch or an Entire Breakaway System
can I use just the cable and breakaway switch or do I need to buy the complete breakaway system? | If all you need is just a replacement breakaway switch then you could just use the part # FA80-00-2060 as it will basically fit any trailer breakaway...
Trailer Hitch and Wiring Recommendation for 2015 Ford Escape
I am looking to purchase a trailer hitch w/ wiring for a 2015 Ford Escape 4wd no trailer package. Can I use a the Class III and if so which is the best one to use? Which do you recommend? | On your 2015 Ford Escape, I'd suggest the Curt Class...
Is MagnaFlow Stainless Steel Catalytic Converter # MF94139 Approved for Use in Nevada
Looking to move to Las Vegas NV. Would this work for there emissions if installed before I move? | The MagnaFlow Stainless Steel Catalytic Converter # MF94139 that you referenced is EPA approved in 49 states, the lone exception being California....
Recommended Weight Distribution System on a Boat Trailer With Surge Brakes
Hi, I was reading this article and the etrailer agent said he attached a link to all of the weight distribution systems that are compatible with surge brakes. https://www.etrailer.com/question-51522.html But I dont see the link anywhere, can...
How to Order Replacement Key for Fastway Trailer Lock FA86-00-3685
I purchased a hitch from you with locking pins. I left my keys on the bumper and though I found them they had been run over. One doesnt work so I was wondering if I can get more keys from you. | I checked your order notes and it looks like you...
Can Either Hitch Ball On Flash Solid Steel HD Adjustable 2-Ball Mount Be Used In Full Rise/Drop
Does this ball mount take standard threaded balls? I need both balls to be 2-5/16. I need to raise tongue height to launch at my ramps and lower tongue height to get in my garage. Please let me know. Thanks | The hitch balls on the Flash Solid...
Installation of MagnaFlow Catalytic Converter on 2001 Ford F-250 Super Duty 6.8L V10
There are two oxygen sensor ports. On the 2001 Ford F250 SuperDuty V10 6.8 set up, does the catalytic converter mount with the oxygen sensor nearest the end towards the front or towards the rear of the vehicle? | I verified with MagnaFlow that...
Availability of Stainless Steel Adjustable 2-Ball Mount with 8" Drop
Do you offer this in stainless? | The closest stainless option we have to the Fastway Self-Locking Adjustable 2-Ball Mount # DTALBM6825 that you referenced is with the Fastway # DTALBM6825-2S, which includes two stainless steel hitch balls instead...
Performance Cold Air Intake for 2008 Ford F-250 Super Duty XLT Triton V10
Im looking for a performance cold air intake with tube and exhaust system for my 2008 ford f250 super duty xlt triton v10 can u help | When it comes to a cold air intake system for your 2008 Ford F-250 Super Duty XLT Triton V10, I have two options...
Can Diversi-Tech 2-1/2 Inch Ball Mount, Part # DTALBM6825-3S, Be Used with 2-Inch Hitch Receivers?
This unit is for a 2 1/2 inch receiver. Will it also work with a 2inch receiver? Is the sleeve removable such that it will work with a 2 inch receiver? If not can I use the 2inch unit with a sleeve added to the receiver? Will the pins go...
Comparing 4 and 5 inch Magnaflow Exhaust Systems for 2000 Ford F-350 Diesel
any pros or cons? I have a 2000 F-350 7.3 crew-cab long bed | The tubing diameter of the MagnaFlow Pro Aluminized Steel Cat-Back Exhaust System # MF16948 which fits your 2000 Ford F-350 diesel crew cab is 5 inch which is going to flow more than...
Recommended 1200lb Weight Distribution System With Sway Control and 2-1/2 Shank For 2014 Ford F-350
I have a 2014 F-350 Ford. Want to tow a trailer. Want a 2 1/2ā shank, weight distribution sway control. 1200lb. Trailer is 6 inch tube frame. Suggestions? | For a weight distribution system that has sway control, 1200lb tongue weight rating,...
Can Weight Distribution System Be Used With 1-1/4 Trailer Hitch Receiver On 2005 Ford Escape
I have an 05 Ford Escape with a Reese hitch and a 1 1/4ā receiver with a 3500# tow capacity. Iām looking for a weight distribution w/ sway control like the Fastway e2. What do you recommend. | I have another option for you, but weight distributions...
Will Diversi-Tech Aluminum Ball Mount Fit a 2004 Ford F-250 Super Duty
will it fit the receiver on a 2004 Ford F-250 Super Duty? | The Diversi-Tech Aluminum Ball Mount, part # DTBM5200, is designed to fit in 2 inch receiver hitches. To my knowledge, none of the 2004 F-250 models were built with the larger 2-1/2...
Size of Allen Wrench Needed to Replace Lock Cylinder in Diversi-Tech Aluminum Ball Mounts
What size allen key is needed to replace the lock cylinder | According to my buddy at Diversi-Tech, the set screw that holds the lock cylinder in uses a .050 inch Allen wrench. Before attempting to remove the screw, I would highly recommend...
Recommended Weight Distribution System for R-Pod Trailer
I have a 2015 Ford Escape with 2.0 L Ecoboost engine. Dealer installed under bumper as opposed to factory installed through bumper hitch. Grr. Max tow weight of 3500 lbs. I am pulling a 2017 Forest River Rpod 20 ft triler. GTW 2690. Approximate...
Will the Diversi-Tech Solid-Tow Adjustable Ball Mount # DTSTBM6625 Fit 2014 F-350 With Factory Hitch
I have a 2014 F-350 Diesel Platinum with a Ford factory hitchthe hitch has a two inch sleeve which I would remove when using this ball mount. Will this fit and will the anti rattle pin engage on my hitch? | The Diversi-Tech Solid-Tow Adjustable...
Filter Your Search
Contact and Help