Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
King Pin Tripod Stabilizer For Lippert Flex Air Pin Box On 5th Wheel RV
Can you you this on the lippert flex air pin box? Thanks | Yes, the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs # UF19-950001 will work as long as your pin box height is within 37 to 50 inches and the pin...
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Finding Hardware for Securing E-Track to Aluminum Trailer
Hello, I want to install e track on my flat bed trailer. The trailer has an aluminum frame with a wood 2x6 douglas fir deck. What is the most secure way to install e track to the trailer? If I need to secure the track to the frame, what is the...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
What Lube Plate For B&W Patriot 5th Wheel Hitch
I purchased from E-Trailer my BandW Patriot hitch for 2010 F250 truck. My KZ sportster 352TH13 with a Lippert King pin is need of a new lube plate and not seeing one that is specific for my situation. Also want one that stays on the King pin...
Valterra Bladex Waste Valve Body for RV Gray Water Tank Thickness
The original Valterrra assembly has an identifier on it ABS 1015 and the black and gray water both connect to it. I need to replace the seals on both black and gray. You still have seals for the black 3 but do not have seals for the 1 1/2...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
Filter Your Search
Contact and Help