Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Compatibility of the Clear Plus Wiper Blades on a 2008 Winnebago Adventurer
I will be probably ordering a couple of the wipers below... can you confirm they will fit the wide arm 1/2 J hook style wiper arms? ClearPlus Heavy Duty Windshield Wiper Blade - Frame Style - 28inch - Qty 1 CONFIRMED TO FIT 2008 Winnebago...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
Is There a Down Side to Going to Higher than Needed Trailer Tire Load Range
I have a 2004 Viking Epic 1706 1299 lbs dry. Adding AC to it, less than 100 lbs and it has 4.80 12 bias ply tires on it now, load rating C. I want to upgrade to a radial but they are load rating D. Loaded we are still only looking at 1500-1600...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
Dimensions for Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947
Can you provide all hitch dimensions? I also need to know the dimensions if, the lh and rh brackets are reversed the frame mounting bracket is turn to the outside of the vehicle, not toward the center of the vehicle frame as pictured . Part...
Magnet Strength Of Peterson Tow Bar Wiring 18148 Lights
How strong is the magnets on the lights? | The Peterson Magnetic Tow Lights - 4-Way Flat Connectors # PE26UR have a strong magnet. They don't have any weight rating or capacity rating. They have been tested at highway speeds with various weather...
Filter Your Search
Contact and Help