Replacement Winch for 2008 Arctic Cat 400 with Factory Mounting Plate
Im seeking a replacement for a broken Warn 2.5 CI winch that was originally installed on my 2008 Arctic Cat 400. The original winch was built by Warn for Arctic Cat according to a decal. Can you recommend a replacement winch kit and let me know...
Recommended Replacement Vehicle Side and Trailer Side 7-Way Connectors
I have a 2000 Starcraft pop up trailerdo not remember the model. I am looking for the 7 pin connector that connects to the hitch. I do not need the cable. I am in need of the receiving part that is built into the hitch it self. Can not...
Should the Center Blue Dot On a Tekonsha Prodigy P2 Be On When Vehicle Is Turned Off?
I just installed the prodigy P2 that I bought. No problem on install and it works fine. My question is about the center blue dot. It stays on after the key is off not hooked up to trailer. Just checking to see if that’s normal for it to be on...
Stainless Steel T-Strap Hinge for Side and Rear Trailer Doors
Are these hinges stainless steel? | Polar T-Strap Hinge for Side and Rear Trailer Doors # PLR3416 is galvanized (zinc-plated) steel but not stainless steel. The zinc coating helps resist corrosion. For a similar hinge that is stainless steel...
Will Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K Fit Lippert Axle
Will this fit a lippert axle | Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-EZ-K that you referenced will fit a 3,500 lb Lippert trailer axle. |
Troubleshooting A Tekonsha RF Prodigy Brake Controller That Won't Pair To The Remote
I have a Tekonsha Prodigy RF for my 2023 Mazda CX-9. I have never been able to get my brake controller to pair. I only receive the .c.e. Communication Error response after it tries to pair. I have tried pairing from the driver’s seat and also...
Winch Mount Recommendation for Superwinch on 2006 Arctic Cat 400
2006 Artic Cat 400 work quad. Any information on installing winch and location of relay on this quad. It looks like it has a factory winch plate, can I use it. | The winch plate you need for your 2006 Arctic Cat 400 is the Bulldog Winch Custom-Fit...
Replacement Brakes and Hubs 1998 Starcraft 24RK Travel Trailer 3,500LB Dexter 5 on 4.75 Bolt Pattern
I have a 1998 Starcraft 24RK travel trailer with 2 Dexter D35 3500 lb axles ID from axle tags. I am looking to replace the electric brake assemblies and hubs/bearings/seals. Wheel bolt pattern looks to be 5 x 4.75 and the spindles are not EZ...
How to Determine Replacement Tire/Wheel Size and Replacement Bearings
I am trying to find wheels/tires and a full wheel bearing set for a 2001 Starcraft 2105. I’m struggling to figure out exactly what I need | For replacing wheels and tires on your 2001 Starcraft 2105, there are a few things that you need to do....
Is There a Timbren Axle Less System that Has Lift Built into it for 3,500 lb Axle
Is it possible to lift the trailer two to three inches using the timbren axeless suspension system? | We have versions of the Timbren Axle Less systems like what you referenced for a 3,500 lb axle that have 4 inch lifts built into them like...
Does Bulldog Winch Mounting Plate Fit 2008 Arctic Cat 400 Without Drilling Holes
Will the Bulldog bdw15002 and mounting plate bdw15108 fit on my 2008 arctic cat 400 without drilling any new holes? Thanks. | Yes, so long as your 2008 Arctic Cat 400 is one of the following models, the winch mount will fit without drilling...
Larger Tire and Wheel Size that Can Fit 2009 Starcraft 1701
I flipped the axle on my starcraft and wanted to put larger rims and tires on. I currently have 5.3-12s. How big can I go without modifying the body? | Looks like you have plenty of clearance for a larger tire and wheel setup but without being...
Filter Your Search
Contact and Help