Can A 2017 Mazda 3 Handle The Tongue Weight From An E-Bike
Were upgradingfoot one of our 2 bikes to a Trek e-bike. Im concerned that the approx. 50lb weight is an issue with our car/hitch/rack setup. I have the EcoHitch 306-x7303 from etrailer installed on my 2017 Mazda 3 4-door sedan in 2019. It was...
Alternate Wire Routing For T-One Harness On 2012 Mazda CX-9
Can the plug be located under the vehicle in some kind of bracket mounted to the hitch? | I have attached a link to an installation video on a 2012 Mazda CX-9 like you own. When all of the access to the tail lights is done in the rear cargo...
Need Replacement Installation Hardware for Draw-Tite Class III Hitch 75531
I had originally installed this then got a new car then had to get new bolts and washers. The instructions call for a M12 bolt-I think this is wrong as their is not bolts in the metric range M12 1.25X25-I think its more a M8 as that does have...
Tire Chain Recommendation fora 2006 Mazda 3 Hatchback with 205/50-17 Tires
Availability of Michelin easy grip composite snow chain for a 2006 mazda 3 hatchback with 205/50 zr17. | We have many tire chain options for 205/50-17 tire sizes. For Class S rated chains that have rim protection and are in the same price...
How Much Does the Curt Trailer Hitch Mounted 20x48 Cargo Carrier Weigh by Itself
Im curious how much this item itself weighs. Ill be using on a 2013 mazda3 with a max tongue weight of 200lbs so I want to see how much of my 200lb limit will be taken up from this product. Thank you for your time. | The Curt trailer hitch mount...
Bike Rack Recommendations for a 2011 Mazda 3 Hatchback with Rear Spoiler
I have a 2011 mazda 3 hatchback with a spoiler. What trunk bike rack do you prefer? | There are options that will allow you to carry bikes on your 2011 Mazda 3 Hatchback, however, trunk mounted bike racks are not recommended on models that have...
Fit of Draw-Tite Class III Trailer Receiver Hitch # 76138 on 2014 Mazda CX-5
Will this fit 2014 CX-5? | According to Draw-Tite, their Class I hitch, part # 76138 is a confirmed fit for the 2014 CX-5. If you'll be using the hitch for towing purposes, you'll also need the following: Trailer wiring harness with 4-pole...
Wiring Harness Recommendation for a 2006 Mazda 3 with LED Taillights
I have a 2006 Mazda 3 with LED tail lights. I was wondering if this kit would be compatible with my vehicle? | For your 2006 Mazda 3 with LED tail lights you are going to want to use a Universal Tekonsha ZCI Circuit Protected Wiring Harness...
T-Connector Vehicle Wiring Harness For 2016 Mazda CX-5 With LED Lights
Do you know if this wiring harness will work on a 2016 Mazda CX-5 with LED tail lights? Curt Custom Fit Vehicle Wiring - C56011 Thank you, | The correct Curt wiring harness for your 2016 Mazda CX-5 is part # C56310. The connectors changed...
2016 Mazda CX5 Yakima Roof Rack Recommendation
Hi, have a question on 2016 CX5 roof rack on naked roof. Looking into the Yakima round roof rack fitment with Q clips and towers. Would the one listed on your site from 2015 model fit the 2016 model? | For your 2016 Mazda CX-5 with a naked roof...
Fit of Flint Hill Goods Aluminum Cargo Carrier # FHG69ZR on 2008 Mazda CX-9
I have a 2008 Mazda CX9. The clearence from the hitch to the ground is 11 inches. The hitch is rated at 400 lbs Class III. Ill be hauling a snowblower or a generator. I checked my vehicle and model on your website but the cart with ramp that...
How to Remove Rubber Clamp on Exhaust Pipe During Installation of Draw-Tite 76020 on 2017 Mazda CX-9
I bought this hitch. I feel that installing seems easy. I havent installed yet but I am wondering what will be the easy way to remove those rubber support from the exhaust pipe at home apart from putting some oil. I dont have the tool that person...
Recommended Trailer Hitch and Compatible Kuat NV 2.0 Bike Rack for 2020 Mazda 6
Which 2020 Mazda 6 hitch for the Kuat nv 2.0 bike rack? | The hitches available for a 2020 Mazda 6 are a Class I with a 1-1/4 inch receiver tube. For a Kuat NV 2.0 that will work in that hitch, you'd want to go with either # NV12G in Gunmetal...
Bike Rack Recommendation for 65 lb E-Bike with Ramp for Easier Loading/Unloading
How high is this rack from the ground? Does it have a loading ramp? Can it hold one 65# ebike and one 20 # road bike? | The Thule T2 Pro XTR bike rack part # TH69TX has a weight capacity of 60 lbs per bike so it's not going to work for you...
Troubleshooting Turn Signals Not Working After Installing Curt Wiring Harness on 2009 Mazda 5
2009 mazda 5 trailer wire loom - i installed your 4 wire trailer wire loom on my mazda 5 and now my turn signals do not work on my car , this is without the trailer hooked up can you help | If just the turn signals are not working on your 2009...
Fit of Curt C55593 for a 2009 Mazda CX-7
Hello I am looking for a wiring harness with 4 flat plug that installs into the existing wiring harness in my 2009 Mazda CX7. I am look at the Curt harness item number C55593 I just want to make sure this one just plugs right in. Also, this...
Will the Covercraft SeatSaver part # SS2464PCCH fit a 2014 Mazda CX-5
will the seat covers for a 2013 mazda CX5 fimodel # ss2464PCCH fit 2014 CX5. Thanks | There were no changes to the seats from the 2013 model Mazda CX-5 to the 2014 model so yes, the Covercraft SeatSaver part # SS2464PCCH that you referenced...
How to Obtain New Mounting Hardware for Curt C12156 Class II Hitch
Hi I have the above hitch and want to move to a new vehicle. Does etrailer sell just the mounting hardware? Thank you | We sure do! You'll need part # RHK, which is our replacement hardware kit. On the RHK product page which is linked for...
2018 Mazda CX-9 Roof Rack For A Naked Roof
On my bare roof 2010 Mazda CX-9 I am able to use the front and very rear mounting areas to attach crossbars to the bare roof which gives about 54inch spacing between the crossbars. Having an issue finding something that gets this type of distance...
Curt 2 Bike Platform Rack Weight
Im planning on using it on a Miata which sit low compared to any SUV. I am comparing the Curt, Hollywood and Swagman, and noticed that the other two weigh 25lbs, but the Curt weighs in at 46lbs. Is this number correct? All the designs seem similar...
Will the EcoHitch 306-X7303 Hit the Ground Once Installed on a 2017 Mazda 3?
I’m planning to buy the 2” eco hitch for a 2017 Mazda 3 sedan. Have there been any issues with the hitch scraping speed bumps, driveways or other common obstacles? | I have not heard of anyone having any issues with the hitch bottoming out after...
Will the Thule Canyon XT Roof Cargo Basket Fit My Factory Crossbars on My 2017 Mazda CX-5?
Do you have any recommendation for cargo net to tie down the cargo? | Yes, I confirmed with Thule that the Thule Canyon XT Roof Cargo Basket # TH859XT will fit the factory crossbars on your 2017 Mazda CX-5. In addition, your vehicle will also...
Will Trunk Mount Bike Rack Cause Damage on 2018 Mazda CX-9
Hello! Im looking to purchase the Yakima FullBack 3 for my 2018 Mazda CX9. I was happy to see the video you have on that exact same model.... however, Ive now read two reviews and seen one photo on your own site that talk about denting on the...
Roof Rack for 2020 Mazda CX-5 with Factory Side Raised Rails to Carry Thule Hullavator
My end goal is to fit the Thule Hullavator Pro on to the Thule WingBar Evo 150. I purchased all of the parts in this pack to set up the roof rack system that the Hullavator would be mounted on: https://www.etrailer.com/multi-product.aspx?pc1=TH711200andpc2=TH4...
Filter Your Search
Contact and Help