!Pleasure Way  x   >   !Rockwood Extreme Sports Package Camper  x   >   !Durastar  x   >   M-3 and Associates  x   >  

LOOKING TO SEE WHAT ALL COMES IN THIS KIT DOES CABLES COME WITH IT AS THEY ARE SHOWED IN PICS | The Conventional Ramp Door Spring for 7' Wide Enclosed Trailer, # ERS120D81 includes the spring assembly and cables. |

I have a 2021 look element trailer. I want to add two things. The first is a tow hitch underneath the rear of the trailer. It only has to be able to tow 400 pounds. The second thing is that I was wondering if I can buy gas shocks for my rear...

Im looking at your 96inch rear gate spring assist set up. I wanted to know if it is enough for my haul mark enclose hd landscape/ car hauler? The springs were broke when I got it and the gate feels like a lot more than 160 but not sure. The...

Does the 250 LB Capacity refer to the maximum ramp weight or the maximum Tension on the lift cables? I would expect that it refers to the tension on the cables since the load could vary depending on where the cables are attached to the ramp....

need to replace the cables and mounting hardware that mounts on the ramp door cant seem to find the hardware on your sit do you sale them. looking for whats in the pix. thanks | We carry the replacement cable you're looking for as part # CAB1-8CB150,...

Will this replacement cable work with my ramp spring? Mine is 72inch and I see this is for a 96inch ramp spring. | You will likely have to shorten where the cable is connected to get cable # CAB1-8CB150 to work with a 72 inch ramp spring but...

I have a ramp door that is 72 inches wide, the weight is approximately 160#. What is the minimum distance between the drums on your CB250D96SHD can they be adjusted to a narrower width? | The whole assembly (96 inches wide) would be too long...

Can this lift be used on the ramp door of a toy hauler that is 8 ft long and 8 ft wide. the weight is 200 lbs Have not bought the toy hauler yet. Need to have help with door. Not as strong anymore | I do have a solution for you but the Rack'Em...

This is the correct torsion spring for my trailer. A Haulmark 7x16 enclosed trailer. However, all I need is a set of the door cables. Do you sell those separate for this this spring? | We do offer cables alone for enclosed trailer ramp torsion...

Hi, I have a Isuzu Van that we have retro fitted a rear tailgate/ ramp system. At the moment we have a sketchy winch that lifts and lowers it. I would like to put a garage door spring on it like whats listed on your web site. Do you stock a...

Hi, Im looking to convert a double door to a ramp door on a 6x12 trailer. Not really sure how to go about this. Is the easiest solution to buy a ramp door? Do you sell them? Or is it possible to use the double doors as the ramp? Thanks,...

I have a 20x8.5 Continental Cargo enclosed trailer with the overhead springs and cables on the rear ramp door. I use the trailer daily, and open the door 20+ times each day. The cables seem to wear and fray relatively quickly. Today, the right...

Can the mounting brackets be moved out to 82inch to mount where my one mounts now? | It is not recommended to adjust any of the parts attached to the main tube of a spring like # CB250D96SHD because of the tension on the springs. Only a certified...

I HAVE 24 F00T ENCLOSED TRAILER ITS 89 INCH ramp spring END TO END CAN I CUT A DUALSPRING 96 IINCH DOWN TO FIT | Yes, you can trim down the 96 inch long ramp spring # CB250D96SHD to work in an 89 inch space. I have linked a video review of...

I just built a enclosed snowmobile trailer and need spring assembly I have a opening of 82 inch for rear door and52 inch front door witch spring assembly can I use for the doors. thank you | For the rear opening I recommend using enclosed trailer...

My enclosed trailer is home made and measures 92inch inside. Can the CB250D96SHD be easily cut down to fit this width of trailer? | Yes you can cut the shaft on the 96 inch wide ramp spring, # CB250D96SHD, to fit your 92 inch wide trailer....

will this be correct for an enclosed 1992 pacea utility trailer | The Replacement Cables for Enclosed Trailer Ramp Spring # CAB1-8CB150 are 150 inches long which is more than enough length from the spring wheel to the door of your 1992 Pace...

does it come with a cable | The Replacement Drum for M-3 Dual Ramp Springs - Left Hand # DRUM-M-3LH is just a replacement drum for the Conventional Ramp Door Spring Kits # ERS120D81 and # ERS160D96 so it doesn't come with a cable, but the cable...

I have a 28foot Haulmark car hauler trailer w one of the 2 ramp door springs broken.. I see CB250D96SHD M3 is close to what I am looking at.. My trailer is 1foot taller than standard height, so obviously the door is heavier than some.....

I am looking to build a trailer gate/ramp and want to know how much this spring is designed to lift. From some videos it looks too strong for my application. Ramp Spring - 2K Torque for 1-1/2inch Shaft - RH # RS16933RH 1/2inch Diameter Greasable...

with the cable unraveling from the bottom of the spool when opening the door... does the spring tighten or loosen relative to the end of spring attached to the mounting bracket? thank you........ | On a torsion spring like that on # CB250D96SHD...

Im replacing a single spring system [150 lbs spring] and would like to go with the double spring 230 lbs system due to increase of weight on the ramp. My dimensions are as follows: 82.5inch between mounting brackets 89.75inch from outside...

Is the unit water proof of does water get into box | The Locking Floor Mounted Storage Box for Enclosed Trailers # M387FR is not waterproof. The latch and lid were not designed to be waterproof as it is to be mounted inside an enclosed trailer....

2005 road force by wells cargo trailers my bar that holds the springs measurses 87 3/4 the space from out to out of cable wheels is 83 3/4 does this spring assembly 96inch work or there is a diferrent one that you do have ? | The closest ramp...