Will the Cruiser Accessories Bubble Shield # CR72200 fit a Standard Size License Plate
Does the tinted shield fit inside a standard frame? Thanks! | The Cruiser Accessories Bubble Shield # CR72200 that you referenced is designed to fit over a standard sized license plate without a frame around it. If the frame was pretty flat...
Does Diamondesque License Plate Frame CR18130 Come With One Or Two Frames?
On the frame, does this come front and back or do I need to order 2 singles plates fames | I believe you are referring to the Diamondesque License Plate Frame - Chrome and Clear # CR18130 that you were looking at. This is sold as a single frame...
Front License Plate Frame Needed for 2007 Toyota Tundra
The license plate on my 2007 Toyota tundra truck is only attached by 2 screws and I have found that the car wash places practically rip off the holder. Will these be better? | Yes, if you only have two top bolt holes available on your 2007...
Mounting Hole Dimensions Of Eagle Motorcycle License Plate Frame
Can you tell me the measurements of the top hole centers and side hole centers? Thank you | Yes, The Eagle Motorcycle License Plate Frame part # CR77023 mounting holes measure 6" apart on top and 3" apart on the sides. The elongated holes themselves...
Dimensions of Cruiser Accessories Palm Tree License Plate Frame # CR19003
What are the exact outside dimensions of this frame? I have a 2004 Lazy Daze rv and the area that the plate fits in is only 12.5inch x 7 | At its longest and widest point, the Cruiser Accessories License Plate Frame, part # CR19003 measures13-1/2...
What Size Screws Come With the Star Pin Locking Fasteners for License Plates and Frames
What are the screw dimensions of the CR81200, are they #14x3/4"? | Correct, the Star Pin Locking Fasteners for License Plates and Frames part # CR81200 comes with four #14 x 3/4" screws. |
Will Cruiser License Plate Mounting Plate CR79150 Fit 2001 Mitsubishi Eclipse Back Bumper
will this fit for a back bumber on a 2001 mitsubish eclipse gt | The Cruiser License Plate Mounting Plate # CR79150 is a universal fit license plate bracket. This mounting plate can easily be made to fit your 2001 Mitsubishi Eclipse. The...
Dimensions Of Fasteners Included With Cruiser License Plate Fasteners
What is the dimensions of the bullet-head screw CR80733? Need - 6 mm x 1.00 x 20 mm. thanks | I went to the ware house and pulled the Cruiser Locking Fasteners for License Plates, part # CR80733. I took some measurements for you that you requested....
Adding a License Plate Bracket to Carpod Hitch Mount Cargo Carrier
Im interested in: 24x48-3/4 Carpod Walled, Folding Cargo Carrier - 2inch Hitches - w/ Lid, Bag, Rise Shank - 450 lbs Item # M2205-01-02 I drive a 2010 Ford Expedition and am concerned about the carrier blocking the license plate. In NYS, license...
Is Cruiser Accessories CR76200 Tuf Flat License Plate Shield Compatible with License Plate Frames
am i able to use my license plate frame over this cover? or will it be too thick for the screws | According to Cruiser Accessories, their # CR76200 Tuf Flat license plate shield is designed to work with a license plate frame, so it'll work just...
What License Plate Frame do I Need for a 7" x 4" Motorcycle Plate?
good day...how are you ? i am really likening this plate frame and search nearly the whole internet for motorcycle size ,7inch by 4 inch .....my Harley is custom and that plate will definitely compliment it lol...is there any resources that...
Which Star Pin Locking Fasteners To For License Plate Cover On 2012 GMC Terrain
Would these fit my 2012 GMC Terrain and also how many would i need for your flag license plate | To secure the USA Flag License Plate Frame # CR23003 to your 2012 GMC Terrain you would want the Star Pin Locking Fasteners for License Plates and...
Is Palm Tree License Plate Frame # CR19003 Chrome
This looks more like brushed nickel color. Is that accurate? | The Palm Tree License Plate Frame # CR19003 that you referenced is chrome. The pictures were dulled so that the details can be seen better and there would be less reflection but...
Where Was USA Flag License Plate Frame Made
Was this made in the usa | According to the manufacturer, Cruiser, they design and engineer their products in the USA, but they manufacture parts in China, so that is where the USA Flag License Plate Frame - Red, White, Blue and Chrome # CR23003...
Will Cruiser Star Pin Locking Fastener with Square Back Fit in Round License Plate Hole?
What do you recommend for round holes? I assume the square nut's foot wont work. | The Star Pin Locking Fasteners # CR81200 works in round holes since the hole will likely be larger than the square recessed area behind the larger clips; the...
Dimensions of the Rattle Stop License Plate Frame Locking Bolts CR81400
How long are they and what diameter? | To get the dimensions you asked for, I went out to the warehouse and got this item and measured with a dial caliper. The bolt in the Rattle Stop Locking Fasteners for License Plate Frames, # CR81400, is...
What Size License Plate Does the Island Cruiser License Plate Fit
I just concidered it might be the size for a motercycle since there are no dementions on the description. Should it fit my car? Thanks. I dont think the make should matter, but I have a 2000 BMW 323i | The Cruiser Accessories Palm Tree License...
License Plate Bracket Needed for Smaller Trailer License Plate
I have a standard sized license plate holder on my trailer, but a small license plate. Is there an adapter plate that will hold a small license plate on a standard sized larger holder? | From what you're describing it sounds like the Optronics...
Is the Cruiser Accessories License Plate Mounting Plate # CR79150 Visible Behind a License Plate
So ... when installed on a flat surface e.g., rear, perpendicular wall of trailer, this bracket has the effect of raising the license plate and frame off the surface a bit, but the bracket itself is hidden behind the license plate/frame ......
Are License Plate Fastener Caps CR82650 Matte or Glossy
Hello, Im looking at the black license plate fastener caps CR82650 as a couple of mine have gone missing. I do not like the gloss black covers, so Im wondering if these caps are matte black like my current caps. Please let me know what you...
Are Tinted License Plate Covers Legal
i live in missouri and wondering if this is legal in my state? tuf flat shield for license plate- smoke | At this time the Missouri Department of Revenue website states that all parts of the license plate must be visible and clear for inspection....
Will the Golf Club License Plate Frame # CR19509 Fit a 2015 Chevy Colorado
my husband has a 2015 Colorado pick up. Will the license plate frame CR19509 fit without any trouble on this pick up? | Yes, the Golf Club License Plate Frame # CR19509 that you referenced will fit the standard license plate area that is...
Anti-Theft License Plate Screw Kit Recommendation for a 2009 Honda Pilot
Will this fit a 2006 Honda Pilot? I was told the screws are metric and 6 x 1.0 they are flat on the end, not sharp/pointy. | The locking license plate screw kit you would want for your 2006 Honda Pilot would be the Locking Fasteners for License...
What Material is the Two Tone License Plate Frame # CR63350 Made of
I like the style but dont want plastic on a front plate likely to get backed into. | The two pieces of the Two Tone License Plate Frame # CR63350 that you referenced are made of steel and not plastic. Once piece is powder coated and the other...
Filter Your Search
Contact and Help