What is MIL/Thickness of LaSalle Bristol XTRM Roof Membrane
Is this roof membrane 60 mil or 45 mil? | The LaSalle Bristol XTRM roof membrane, part # 3441700534142711440, is 27 MIL which makes it about 0.68 mm thick. |
Will The MORryde MR34AR Shock Absorbing Equalizers Fit A 2021 Vengeance Rogue Armored 4007
We have a 2021 Vengeance Rogue Armored 4007 with lippert 7000lb axles. I want to upgrade the suspension with equalizers and a shackle wet bolt kit. There are so many different choices for equalizers. Are there pros and cons for each? Which...
Will The BV0534-00 Replace The Plastic Ventline Cover On My 2017 Thor Class C?
will Item BV0534-00 replace my plastic ventline cover on my 2017 Thor class C? | Hello Gary. The Metal Low Profile Replacement Cover # BV0534-00 is made to work with the Ventline Ventadome roof vent model V2110. I do not have a way to look...
Replacement Gear box for Venture 900-258125
I have a 2015 Shockwave 5th wheel toy hauler. I believe I need a new landing gear box. The landing gear motor is a Venture serial number 9000-258175 LCI PIN 142178 12 vdc - 30 amp. Do you have a replacement gear box that will fit? | The correct...
Can LEDs for Optronics RV Interior Dome Light # RVILL39 Be Replaced
Hello, This weekend our oval LED light with a switch stopped working. I took the lens off and found all these little squares, of which would be the LED lighting. How do I change this out? Thank you! | The LEDs inside the Optronics RV Interior...
Recommended Solera Slide Out Toppers For A 2021 Vengeance Rogue Armored 4007
We have a 2021 Vengeance Rogue Armored 4007. We want to get the correct topper for the two slideouts. The slideouts have the prep kit installed. One slide out is 99.125inch wide flange to flange. The other slide out is 154.75inch flange...
Bolt Hole Distance and Arm Length for the Replacement Lift Arm # FVK8011-05
The other parts like this on you die have measurements. This one doesnt. Can you provide the measurements. The measurement from screw hole to screw hole sends the length of the arm. | The distance between the bolt holes for the Replacement...
How to Choose Correct Replacement Trailer Idler Hub
I am trying to figure out the differences between a 1000, 1100, 1250 and 1350 hub. If they all are 5x 4.5, 1/2 inch studs, straight spindle with 2 x L44629 bearings, why are they rated diffently? Why does only CE smith rate it at 1350 lb? |...
Replacement Trailer Taillight Lens for Bargman 59 Series Trailer Taillight
We need a red replacement clearance lens for a red T Bargman 59 SAE-AP2-06-DOT I tried to upload the front and back photos but the option to upload another photo didnt work. | For the amber Bargman 59 lens you'd want the part # 34-59-012 and...
Recommended RV Radio Replacement for Memorex Model CDR-1000
I have a Memorex radio/cd model # cdr-1000 will the Jensen JWM60A be a good replacement for it. | The Jensen Stereo # JWM60A will replace a Memorex CDR-1000 in your RV. The Jensen system is really nice and definitely worth the upgrade with...
Can Equa Flex Equalizer be Used with Correct Track Alignment Kit
Can this equalizer be used with gen 3 correct track alignment kit? | Yes, the EquaFlex equalizer kit part # LC279688 is compatible with the Correct Track alignment kits like you have. |
Can the Rear Jacks on the Ground Control 3.0 be Lowered While Truck is Still Attached
Can the rear jacks be lowered while the truck is still attached? | The Lippert Ground Control 3.0 # LC358590 is very user-friendly and will allow you to manually adjust the front, left, right, and rear jack combinations separately from each...
Recommended Jensen Stereo to Replace Memorex CDR-1000 RV System
Will this stereo replace a Memorex CDR-1000 | The Jensen Stereo # JWM60A will replace a Memorex CDR-1000 in your RV. The cutout for the Memorex from my research is 5" X 8 1/2" and the Jensen is 6" x 9" so you may need to increase the size of...
Filter Your Search
Contact and Help