Shockwave 5W Toy Hauler x > !BE-Series x > 4500 Cab and Chassis x > Adirondack Travel Trailer x >

Replacement Gear box for Venture 900-258125

I have a 2015 Shockwave 5th wheel toy hauler. I believe I need a new landing gear box. The landing gear motor is a Venture serial number 9000-258175 LCI PIN 142178 12 vdc - 30 amp. Do you have a replacement gear box that will fit? | The correct...

Can LEDs for Optronics RV Interior Dome Light # RVILL39 Be Replaced

Hello, This weekend our oval LED light with a switch stopped working. I took the lens off and found all these little squares, of which would be the LED lighting. How do I change this out? Thank you! | The LEDs inside the Optronics RV Interior...

Replacement Hub and Drum Assembly Recommendation for a 2007 Dutchmen Adirondack 31-RL

2007 Dutchmen Adirondack 31-RL with 4k al-ko axle it has a AL-KO Kober axle H352 656645 kg1818 What bearings, hub and seals are needed | The 10" diameter x 2-1/4" wide Dexter Trailer Hub and Drum Assembly # K08-426-91 is the only option we have...

Replacement 30 Amp Converter For Travel Trailer

I have a Dutchmans Adirondack 30RL and I need to replace the 30 amp converter. | While we have no way of knowing what converter is in a Dutchmen Adirondack trailer, you can use the following: - Progressive Dynamics 9300 Series RV Converter...

Replacement Trailer Hub and Drum and Brakes for AL-KO 8490 Axle

Need drum/brake assemblies including inner/outer bearings, seals, washer and grease cap for alko 8490. Do you have complete set of 4 with everything included? 5 x 4.5 10 inch x 2.25 | Based on what we could find, the AL-KO 8490 is a 3,500 lb...

Replacement Waste Valve for a 2008 Dutchmen Adirondack 31RL

I have a 2008 dutchman adirondack 31rl. Is this the correct waste valve? | Thanks for reaching out, Ryan! The Valterra Waste Valve Body # T1003PBC will work as long as you're replacing this on a 3" diameter waste valve that can be removed. I...

Will The MORryde MR34AR Shock Absorbing Equalizers Fit A 2021 Vengeance Rogue Armored 4007

We have a 2021 Vengeance Rogue Armored 4007 with lippert 7000lb axles. I want to upgrade the suspension with equalizers and a shackle wet bolt kit. There are so many different choices for equalizers. Are there pros and cons for each? Which...

Can Prodigy P2 Brake Controller Be Used on Tandem Axle Trailer

Will this work with a 3 axle trailer? In the description is says for 2 axles | The Prodigy P2 part # 90885 is actually good for up to 4 axles so it would easily handle your triple axle trailer. |

How Does a Curt Trailer Hitch Install on a 2012 Dodge Ram 4500 Cab and Chassis

When lookin at the image of the hitch it shows holes on the top but yet there are no holes on the bottom of the frame on my 2012 ram 4500 chasis cab....also the installation guide is not loading....I was wondering if u could confirm how the...

Can Equa Flex Equalizer be Used with Correct Track Alignment Kit

Can this equalizer be used with gen 3 correct track alignment kit? | Yes, the EquaFlex equalizer kit part # LC279688 is compatible with the Correct Track alignment kits like you have. |

Will The BV0534-00 Replace The Plastic Ventline Cover On My 2017 Thor Class C?

will Item BV0534-00 replace my plastic ventline cover on my 2017 Thor class C? | Hello Gary. The Metal Low Profile Replacement Cover # BV0534-00 is made to work with the Ventline Ventadome roof vent model V2110. I do not have a way to look...