Disc Brakes With 1/2 Inch Wheel Bolts For 5th Wheel With 7,000 lb Dexter Axles
My wheel studs are 1/2 x 20tpi. After more intense searching I have found the following 24TA-BLKIT HBA-16 90885 K2HR712E plus bearings and seals. would these be correct for a 2010 Montana Big Sky with 2 Dexter 7000lb axles, ez-lube? | I can...
Disc Brake Kit Recommendation to fit 7,000 lb Dexter Axles
My 2010 Montana 5th wheel has 7000 pound Dexter axels and they have E-Z lube spindles. Do you need a different disk kit than you would for the standard axel without the E-Z lube, and do you need a different set of bearings from those shown...
What Is The Purpose Of Steel band On Leaf Springs
Hello, Im building trailer and I noticed that the leaf springs have a yellow line at one eyelet and a band around the leafs at the other end. I assume the yellow goes to the front of the trailer and the yellow marke goes to the front. Is this...
Replacement For 86-1/2 Inch Long 5,200 lb Axle
Do you have a replacement that will work for a Dexter 120088 it is on a 2021 Grand Design Reflection. | Appreciate the photo, and what that shows is you have a 5,200 lb axle that is 86-1/2 inches hub face to hub face with a spring center to...
Replacement Trailer Grease Seal for GS-2250DL2017-42
needing the correct an best axle seal to replace a trp...gs-2250dL2017-42. | We have that exact replacement grease seal with the part # GS-2250DL which is the highest quality seal that is available for it. These are sold individually so if you...
Can the Road Armor Shock Absorbing Equalizer Kit Replace the Triangular Equalizer TREQ310
Could this kit replace the TREQ310? | You can substitute the Road Armor Shock Absorbing Equalizer Kit # LC696740 for your Triangular Equalizer # TREQ310 but you will need to get shorter shackle straps as well. They both have the same side to...
Can E-Z Flex Suspension System Replace Trailer With Taller Equalizer
I recently order Dexter Equalizer kit # K71-652-00. My axles are rated for 5200 lbs and my spacing between is 5 5/8 . After I installed them and lowered the camper back down to the ground it lowered the trailer ride height about a 1.5 inches....
Recommended Disc Brake Hub and Rotor Kit for Lippert 7,000 lb Axles on Grand Design Solitude
Do these 9/16 stud rotors fit the 7k Granddesign SOLITUDE lippert axel? | The Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs # K2HRCM1337-9DAC are the correct fit for your 7,000 lb Lippert Axles. They do not come...
Can Hub # 42660UC1 Be Converted To Fit a Spindle # TRU57FR?
I bout TRU67fr 6000 lb spindle and 42660uc1 6 on 6 6000 lb ag hub. The hub doesn’t fit on the spindle could you get me parts numbers for bearing and races, and the grease seal that will make this work | You are either going to get a different...
Recommended Bearings, Seal, And Grease Cap For Lippert 3500 lb Axle
I am looking for spare bearings, seal and dust cap kit for my travel trailer with Lippert 3500 lb. axle. Lippert part #35039 Variation #V000155960 Serial #045-003885526. Can you help with these parts? Thanks! | According to Lippert, the items...
Filter Your Search
Contact and Help