Are There Any Custom Fifth Wheel Install Kits for a 1995 Ford F-250
Looking at your website is the only frame support kit available the universal kit which has only angles that bolt to frame??? Thanks | Correct, there isn't any sort of custom fifth wheel install kit for a 1995 Ford F-250 because there aren't...
Landing Repair Kit for Lead Leg of Venture VMC900R-146877
What’s my replacement part for landing gear vmc900r-146877? | Yes, for your Venture VMC900R lead leg jack the part # LC146059 is the correct repair kit. |
Does Buyers Products Hitch Plate Fit 1996 Ford F-350 Cab and Chassis
WILL THIS HITCH PLATE FIT 1996 FORD F-350 ?? WHERE CAN I MOUNT EXISTING TAIL LIGHTS ? ALSO LOOKING FOR A SIMPLE WIRE KIT FOR SAME TRUCK | The Buyers Products Hitch Plate with Receiver Tube - Ford # 3371809060A will indeed fit a 1996 Ford F-350...
Recommended Plug In Brake Controller for a 1996 Ford F-350
Hello I have a 96 at 350 diesel dually and am trying to hook up a trailer brake controller and was wondering what originally hooked into that vehicle with factory connectors that are already in place on the vehicle? Witch controller and 7 pin...
7-Way Recommendation for Bed of 1994 Ford F-250 for Lance Camper
Need electrical connector for 1994 ford f250 in pu bed for Lance 2001 camper. I believe it is standard, 7 pin? | Sounds like you are wanting to put a 7-way in the bed of your 1994 Ford F-250. We have kits for just that like the part # 41157....
How to Install the Reese Universal Base Rails # RP30035 on a 1993 Ford F-250
Could you tell me the fifth wheel rail location measurements distance from rear rail edge to pickup rear bed edge for a 1993 Ford F-250 regular cab, 2wheel drive 8 foot bed. Using the universal installation kit. Thank you in advance for your...
No Power From Blue Wire On Tekonsha Voyager Brake Controller
I have no power coming out of the blue wire from the brake controller, 96 Ford F-350 super duty, | If you have no power coming out of the blue wire from the brake controller, then you have a short on the blue wire somewhere or it may have...
What Does Brake Controller Install Connector Look Like for 1994 Ford F-250
What does the factory Brake controller harness look like ? Mine looks like its been cut and spliced . If its not correct what can I do to make it a plug and play for a Takonsha brake controller or other brand ? Thanks | I attached a picture...
Air Lift LoadLifter Air Spring Compatible with In Bed Hitch on 1995 Ford F-350 Crew Cab Dually
Have had problems finding a set that fits my 1995 F-350 Crew Cab Dually with 7.3 Diesel. Usually it states they wont work with a 5th wheel hitch I have Draw-Tite 5th wheel/goose neck bed rails. I think there was an issue with a frame bracket...
What Converter Do I Need for a Magnatek Model 940-2?
Magnetek series 900 model#940-2 40amp what can I replace it with | The part that you need for a replacement converter for your Magnatek series 900 model 940-2 is the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #...
Trailer Brakes Arent Working After Replacing a Corroded 7 Way Plug
I have a professionally installed Curt Spectrum. It worked fine for awhile. The 7 pin plug corrosion caused lights and trailer brake to not work. I rewired the lights and brake away switch and they work fine but the the brake has power but shows...
Can an Edge Evolution Programmer be Used on More than One Truck
can he edge evolution ep96tr be used on more than one truck | The older programmers only worked on one vehicle at a time to prevent people from just passing around. To move it to a different vehicle, it had to be unpaired from the old vehicle...
Height of Trailer Wheel Center Cap
Hi, Your product information only gives the diameter of the pilot hole on any of your caps. I am surprised you do not also give the height depth. Anyway, I need that dimension on these caps to make sure they will accommodate the length of the...
Will the Buyers Products Hitch Plate Fit a Ford Super Duty Dump Truck
I have a 1993 F super duty with a 12foot dump bed. I need a trailer hitch to pull my 18foot trailer will the # 3371809061A plate fit my truck? | The Buyers Products Hitch Plate part # 3371809061A is a universal weld/bolt-on hitch plate. That...
How To Switch Between Trailer Settings on the Tekonsha Prodigy P3 Trailer Brake Controller
Once a setting is made and stored on the controller how do I that stored setting to use. The instructions dont really tell me. Can the stored settings menu be accessed while the brakes are applied? | The storable settings on the Tekonsha Prodigy...
Recommended Vent Cover Replacement For A 2003 Glendale Titanium
I have a 2003 Glendale Titanium that needs a new vent cover. I cant find any markings indicating the original manufacturer. Can you find that information so I order the correct cover the first time? | Manufacturers do not list the vent brands...
Where Do You Install 5th Wheel Hitch on 1996 Ford F-250
Where do you install a fifth wheel hitch on a 1996 ford f250 | In order to install a fifth wheel hitch in your 1996 Ford F-250, you will need a set of base rails like part # RP30035. The first rail will sit 32-1/2 inches from the rear edge of...
Stake Pocket Tie-Down Anchors for Use on Car Hauler Trailer
Hello, The stake pockets on my car hauler trailer are 4 inches deep so these anchors will not work. Do you have any longer tie down anchors like these that will work with deeper stake pockets? Thanks very much. | We offer a range of stake pocket...
Does Factory Brake Control Need to be Removed to Install a New Brake Controller in a 2009 Ford F-350
My 2009 Ford F-350 has a factory installed integrated brake control that doesnt work very well on my heavy 5th wheel. Will this plug in directly an override the oem brake controller, or do I have to uninstall the oem one first? Thanks. | Your...
Brake Controller and Install Harness Recommendation for 1996 Ford F-250 w Factory 7-Way
Hi. I have a Ford F250, 1996, 7,5 liter 460 gas, 4wd truck. Im adding a brake controller to control my new dump trailer with electric brakes. I have continuity between the plug receptacle beneath the dash board where the brake controller...
Can I Use an Offset Coupler in an 8 Foot Truck Bed?
I had a truck with a 6.5’ bed. I used a 8” offset coupler. Now that I have 8’ bed can I use the off set coupler if that’s all I have | Yes, you will be able to use an offset coupler like the B&W Extend-A-Goose # BWTEXA4200 on your 8ft long truck...
Parts Needed to Install 7-Way and Brake Controller on 1994 Ford F-250
94 f350 it has flat -4 connection- and that appears to use factory connections I don’t think it’s factory plug. I want to instal a break controller. I’d also like to instal a second 7-pin connection in the bed for a future 5th wheel unless...
Suspension Enhancement for 1996 Ford F-250 4WD with B and W Gooseneck Hitch Installed
I have 1996 f250hd 4x4 with a bandw Turnball gooseneck hitch. I cant locate part number for airbags that will coincide with mounting brackets of hitch. | Since none of the air bag kit manufacturers have a fit for your 1996 Ford F-250 with an...
Recommended Battery Size for Go Power Solar Extreme Charging System
What size lithium batteries should I get to go with the go power solar extreme charging system 34282185 | The recommended battery size for the Go Power Solar Extreme Charging System - 570 Watt Solar Panels - 3,000 Watt Inverter Charger # 34282185...
Filter Your Search
Contact and Help