Trailer Hitch Receiver and Wiring Harness For a 2000 Honda S2000
Hi, Im interested in the S2000 hitch C11198 but it says that it only fits 2004 - 2009 S2000s. Do you guys have one that will fit a MY 2000 S2000? Thanks | The Curt Weld-On 2" Receiver # E17 will allow you to have a receiver custom fabricated...
Will the Buyers Products Flatbed Hitch Plate Bumper Fit An International Durastar
Will this fit on a 2007 international durastar 4300 | The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper part # 3371809050 is a universal product which can be made to fit many different applications. I wouldn't be able to inform on...
Should There Be A Magnet Wired Near The Dexter EOH Actuator?
why is there a electric brake magnet wired near the dexter hydraulic brake actuator? | There would not be any kind of magnet wired near an electric over hydraulic actuator like the Dexter # K71-651. Certain setups may require an adapter module...
Trailer Hitch and Wiring for a 2000 Honda S2000
Do you have an installation manual for the hitch its a 2000 honda s2000 | Yes, installation instructions for Curt trailer hitch # C11212 (no longer available) are linked on its product page, right hand side of the page. I have also included...
Rear Anti-Sway Bar for a 2004 International 4300 with Onspot Chains
I am looking for a rear sway bar kit for my 2004 International 4300 on the web site it gives the part number rm-1179-110-00 then says for pickups I need to know if I am looking at the correct part or if there is a image of the complete kit for...
Wiring a Brake Controller to a 2007 International Trucks 4300 Series
The only wires I have been able to find on my truck also control signal lights, since brake and signal lights run off the same wire. My tow truck is a 2007 IH 4300. | We may have a solution for you. To wire a brake controller on your 2007 International...
Looking For New Wheels For A School Bus
Hello! I am looking for new wheels for a school bus. I have photos/info and am hopeful you all can help. Thanks! | Hello Aaron. I am happy to look into it and see what we can offer you. Go ahead and post what info you have in to comments below....
Installing a Trailer Brake Controller on a 2004 International 4300
I have a 2004 international 4300 with hydralic brakes. I would like to install a brake controller along with a 7 way pin. I have found a 7 wire plug in the frame rail behind cab containing the wires for lights signals etc. but Im lost after...
Is There a Hitch Available for a 2002 International School Bus?
I need a hitch fir my 2002 international t444e school bus conversion to tow my 2005 ford freestyle. | To get a hitch on your 2002 International T444E School Bus, you will need to double check the width of the frame and how far the body extends...
Spare Tire/Wheel For A 2003 International Harvester 4400 MD Truck
I have a 2003 International Harvester 4400 MD truck and would like a spare tire and need a rim. I can’t seem to find the rim size. Your site lists this rim for the 4300–can you confirm whether they are the same size as those found on the 4400...
Inner Bracket Dimensions for Buyers Products Hitch Plate with 2" Receiver Tube - Ford
What’s the inside dimension where the chassis would be? It looks like the 35 1/4 is outside to outside. | The inner bracket width of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford # 3371809060A is 34-1/4" plus or minus 0.06" according...
Recommended Trunk Mount Bike Rack and Security Options for a 2005 Honda S2000
my vehicle is a 2005 Honda S2000 i would like to get a bike rack one is o.k., 2 bikes more realistic if there is one with a security feature, so much the better. what is the best way for me to go this is my baby car,so nothing that will...
Recommended Trailer Hitch and Bike Rack for a 2004 Honda S2000 Convertible
Hi, Im interested in getting a trailer hitch and 2-mtnbike rack for my 2004 honda s2000. would you recommend the curt hitch and which model? similarly, which of the bike racks do you recommend? the swagman platform racks look interesting, which...
Recommended Landing Gear For Stabilizing A 2004 International 4300
What type on landing gear will you recommend for a 2004 International 4300 24ft 26,000GVW? I want to install one that way the truck is not shaking when forklifts go in and out. | The best option we will have is the Bulldog Square Jack - Drop...
Difference Between Draw-Tite I Command And The Tekonsha BRAKE-EVN
Whats the difference between this controller and the older I-Command? They look identical to me.... Thanks for the assistance. | Though we no longer carry or sell The Draw-Tite I-Command The Tekonsha BRAKE-EVN Controller # TK63VR is just a...
Recommended Sidewinder Wedge Kit for a B&W Companion 5th Wheel Hitch
I have a B&W Companion 5th wheel hitch in my Ram 3500 with the factory puck system. Can I use the universal wedge that comes with the 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder item # RP61422 or do I need one specifically...
Brake Controller For A 2004 International 4300
Hi, I have a 2004 International 4300 series box truck. Id like to install a this brake controller, but Im not sure how to do it and what other parts Id need. Can you help me with that? Thanks! | Though The Curt Echo Under-Dash Wireless Brake...
Where Does a Trailer Hitch Install on a 2003 Honda S2000
I am hoping to verify that this hitch is mounted to the frame. | The Curt trailer hitch # C11212 attaches to the frame of the 2003 Honda S2000 in 2 places and to the trunk pan in 4 places. I have linked the installation instructions that show...
Solution for Brake Controller that Pulses Trailer Brakes When Hazard Lights are On
need a wiring diagram to hook to a 4300 int. year 2002. problem is pulsating when hazards are on or left turn is on . not working write . they have the brake wire hooked to the left turn wire which is also brake indicator wire . I am troubling...
Recommended Trailer Hitch for a 2001 Honda S2000 to Tow a Motorcycle or Jetski
I am looking for a trailer hitch for a 2001 Honda s2000 to tow a motorcycle or jetski on trailer. What do you recommend for this vehicle that is easy to install prefer no drilling or welding and that is the most hidden, so as to not ruin the...
Where to Find Brake Controller Stoplight Circuit on Truck
Where do you find the hot brake light to hook up a controller too on a IHC 4300 2002 | Behind the brake pedal there is a switch that has wires ran to it that you'll need to test with a circuit tester part # PTW2993 to test all of the wires until...
How To Install Trailer Brake Controller and 7-Way Trailer Connector on International 4300
Have a 2016 International 4300 with air brakes. I need to install a 7-pin trailer plug but the truck does not have any of the wiring to accommodate a trailer plug. What wiring harnesses, fuses, or relays do I need to make this work? I also...
Filter Your Search
Contact and Help