Result: knobs

The knob is what allows you to attach the claw assembly to the Upper Claw Base # Y8880279 on your RailGrab towers. | What hardware do I need to buy when I purchase the part #Y80144 Replacement Large Claw Assembly for Yakima...

I believe what is happening with your Thule Helium Bike Rack for 2 Bikes # TH44VR is that you may not have the knob tightened down all the way. What you're going to want to do is get the pin in place then tilt it right to left as you tighten the hand knob at the bottom. |

Hey Jim, I would recommend the Redarc Tow Pro Liberty part # RED52VR for your 2014 Ford Flex as it only puts a small knob on the dash of your vehicle and is a great performing controller. | my customer has 2014 ford flex 3.5l...

Pro Tip: Spay some lubricant like WD-40 or PB Blaster on the rubber isolators to make it easier to remove the hanger knobs. | I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed...

This unit is very small with the only portion visible on the dash being the control knob. The rest of the unit sits behind the dash and out of the way when you are not towing. | need recommendation on brake controller for 2012...

Since the brake controller plug is under the dash you will probably want to install it under the dash or if there is a location in the center console that is within easy reach of the driver and the button and knob on the brake controller is accessible. I am including a link to a video of a Prodigy brake controller and the plug-in adapter being installed on a 2009 Ford F-150. |

There is a control box that gets installed under the dash, out of sight and then a control knob that gets mounted on your dash wherever you prefer. | I have a 2011 Ford Flex with the factory tow package and I need to install...

This mounts out of sight with only the control knob visible in the cab of your vehicle. I have attached some review and installation videos below for your reference. | I want to add brakes to my 92 Coleman Arcadia pop-up....