bing tracking image

R32  x   >   Raptor  x   >   Rodeo  x   >   Motorhome Chassis  x   >  

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Recommended Replacement Bushings for a Sway Bar On a 1997 Safari Continental

I have a 1997 safari continental. I am looking for sway bar end link bushings. | Shelton, from my research it appears that your 1997 Safari Continental has a Chevy P-Series chassis which would mean that you should have the Roadmaster Front...

Does Install of Triple LED Trailer Tail Light # 328-003-30LEM2 Require Diodes

Are the taillights I ordered Wire and Play so to speak or does a diode need to be added. Not that it matters much for this question but I am installing these on a Montana fifth wheel replacing the standard rectangular taillight you see on most...

Wireless Brake Controller Recommendation for 40 Foot Motorhome

I have a 2000 country coach allure that I was wondering if you have a wireless brake controller. it is a RV forty feet long. we go places where there isent internet alot will that afect signal.? | Hey Joel, the Prodigy RF brake controller...

Replacement for Xantrex XADC 8012 Converter Charger

I have an inverter/charger xantrex xadc 8012 in my motorhome. Do you sell a replacement? | Hello Vee; your Xantrex XADC 8012 is an 80 amp converter charger. For a replacement we have the Progressive Dynamics 9300 Series RV Converter Charger...

Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor

Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

Where to Connect Black Wire from Prodigy P2 Brak Controller

The black hot wire on the brake controller goes connected to always hot or to ignition? | Hey Rafael, The black wire for the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 needs to be connected to a constant 12V power source. If your...

Recommended Replacement for a Magnetek Model 6325 Converter

Hi, I’m looking for a converter replacement for my 1986 Toyota dolphin. I read the thread and wanted to order a replacement for 6300 A model 6325 | It looks like there actually isn't a direct replacement for your Magnetek series 6300A Model...

Replacement Motor Solution for Kwikee Series 32 RV Step with Motor 151332

Hello. Will the conversion kit #LC379145 work on a 3 step A series installed in a Damon Intruder? Gear box #151320 and motor #151332. Thank you very much | Thanks for all the info you gave on your step setup. We've had similar questions...

Which Breakers Work w/ the Progressive Dynamics 4100 Series RV Converter PD4135K?

Hi I recently purchased a PD4135 AC DC Distribution Panel from etrader I went to fit it but there are no breakers supplied , so I need your help to find the correct breakers for this plastic unit pref something that was made to mount to the...

Replacement LCI RV Step Module for 164889

I need a LCI step control module part #164989 Bar code 11675a2772100841 This is for a 2006 Monaco Camelot door step. Do you have anything that will work. | Is it possible the module number is 164889? That cross referenced with our part # LC301702...

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

Replacement Module Recommendation for Power Gear Module 500457

I have a 2001 Holiday Rambler leveling jack controller pad is not working your video says your kit lc359259 will work on my #500457 leveling control witch I guess is obsolete i watched the video it says plug and play my controller has three...

Air Bag Suspension Kit Needed for 1987 Toyota Dolphin Motorhome

Hello ,wanting an airbag for rear suspension on a 1987 toyota dolphin motorhome. | The only air bag suspension kit that is compatible with your 1987 Toyota Motorhome Chassis comes from Air Lift with the kit # AL88113. You might also be interested...

Steering Stabilizer for 2004 Holiday Rambler Endeavor

Will this work on the 2004 Holiday Rambler endeavor | Since your 2004 Holiday Rambler Endeavor is on a Roadmaster Motorhome chassis you have two options for steering stabilizers. You have the part # RM-RBK8-RSSA for if you have leaf springs....

Can I Use the Bargman 30-85-002 to Replace the Tail Lights on my 1993 Winnabego warrior motorhome

I am replacing the existing taillight assemblies. It is a 4 function wire system grn. and blk.wiring with red lense. Blk. wire on center amber lense. Rev. blk. backup. Wht. ground. Is it possible to install a 30-85-002 5 function lighting...

Is There a Replacement Ladder That Measures 12-1/2" Wide Center to Center of Vertical Poles

Ive got a 1987 Blue Marlin Class C motorhome that needs a replacement ladder. I want to re-use the existing mounting points, which means the replacement ladder would need the main vertical tubes to be 12 1/2inch center to center. Do you know...

Recommended Long Rectangular LED Tail Light That is 15 Inches Long and 2 Inches Wide

Do you have a rear light like your item #47-54-001 BUT 14 7/8 long x 2 tall? Thanks | I may have a solution for you, but there is not a tail light that has those exact dimensions. However, if you've measured from the mounting holes on your...

Replacement Lens and Housing for 1991 Winnebago Micro Mini Warrior

I own a 1991 Winnebago Micro Mini Warrior RV. It sits on a Toyota 1-ton dually pickup chassis. I need to find replacement parts for the rear tail light housing including the housing, lenses and bulbs. The original Winnebago parts are as follows: Electrical...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

Option For Hitch With at Least 10k Capacity For 2000 Prevost H345

I am wanting to install a frame mounted hitch set up for my 10,000 lb capacity trailer to haul my SUV. Do you have a set up for a 2000 Prevost H345? This is a 45 long diesel pusher. I would also want/need a 24v brake controller. | There are...

Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

Filter Your Search