Adjustable Ball Mount Recommendation for 2018 Ram 3500 with 2-1/2 inch Hitch
18 Ram 3500 Factory 20 wheels, What would be an adequate drop on an adjustable ball mount ? | For your 2018 Ram 3500 with a 2-1/2 inch hitch the B and W adjustable ball mount that would be the best option would be the part # BWTS20040B which...
Mounting Base Dimensions for Erickson Hide-A-Hooks
will part # EM09094? fit my truck? | I went to the warehouse and measured the base of the Hide a Hooks part # EM09094. The actual base is 3 9/16" by 2 1/8". As long as you have enough flat space available where you intend on mounting them...
Which Husky Bracket Kit Do I Need to Install Fifth Wheel Trailer Hitch Bed Rails on 1990 Ford F-350
I have a 1990 F350 xlt lariat with 8ft bed. I have the bed rails but what bolts aND hardware do I need to install it? | The hardware for a Husky fifth wheel hitch on your 1990 Ford F-350 will depend on the type of rails you have. If you have...
Brophy Camper Tie-Down Compatibility with 1986 Ford F-250
I have a 1986 f250 will this work on it | The Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel - Qty 4 # HSBP will work well for your 1986 Ford F-250. You may also want to consider the Brophy Basic Turnbuckles w/ Hardware for...
How Do Trailer Batteries Normally Get Charged When Being Towed
RE: Trailer Breakaway Kit Battery Charger - Code: 20011 I need a simple way to keep my old RV, 12v deep cycle SLA battery charged while protecting it from over/under charging while on the road. Will this charger handle this application? Thanks......
Fifth Wheel Frame Brackets for 1985 Ford F-250 that Require No Drilling Into the Frame
Hello, I am looking for fifth wheel frame brackets that would fit a 1985 F-250 without having to drill holes into the frame of the truck. If you could help me find those that would be greatly appreciated. Thank you, | Although we do not have...
How Does Draw-Tite 2-1/2 Inch Trailer Hitch Install on a 1988 Ford F-250
I do not have the holes on the bottom side of the fam. | Drilling is required to install Draw-Tite trailer hitch # DT45502 on a 1988 Ford F-250. You will need to drill eight 1/2 inch holes to secure the hitch to the bottom of the vehicle frame....
Recommended Front Mounted Trailer Hitch For A 1984 Ford F-150
I have a 1984 Ford F-150 four-wheel drive I need a front hitch cannot seem to find it. Maybe the back hitch will also fit the front?? Please help me out. | For your 1984 Ford F-150 I recommend the Draw-Tite Ultra Frame Service Body Trailer...
Extending a 2 Inch Trailer Hitch 30 Inches to Clear In-Bed Camper when Towing a Boat Trailer
I have a 2inch by 2 inch receiver hitch. I bought a slide in camper that overhangs the pickup bed 18 inches. Now my boat trailer tongue is to short to make turns.Help. I need at least a total of 30 inches extention. Boat trailer tongue weight...
Will Curt TruTrack Weight Distribution System Fit 1991 Ford F-150
Will curt # 17500 fit 1991 ford f150 to tow camp trailer please advise thanks | The Curt TruTrack Weight Distribution System with Sway Control # C17500 will work well for your 1991 Ford F-150. The TruTrack # C17500 fits a 2 inch trailer hitch...
How Many Hours will the Vision X 9004 Halogen Headlight Bulbs # VX-L9004 Last
I heard you all say in the video that the bulb will only last 250 hours. Is that correct? Ive seen other halogen bulbs that last 10x as long, 2000 hours. | I spoke to my contact at Vision X and he informed me that the Vision X 9004 Halogen...
Correct Grease Seal for Trailer with L44649 Outer and L68149 Inner Bearing
Hi, Im trying to find the correct grease seal for my boat trailer. The outer bearing is L44649 and the inner bearing is L68149. The grease seal doesnt have any markings that I can find. The outside dimension is 2.327 and inside is 1.662....
1987 F350 with 34 inch Frame Hitch Recommendation
I was looking at the curt hitch C15300 and it said it fit a 37.25, my truck has a 34.25 frame, do you have a hitch for this truck? | The 34 inch frame like what you have is typically found on the cab and chassis models of trucks. The hitch...
Deluxe Rear Replacement Bumper For 1991 Ford Pickup
Is the bumper sturdy enough for the button anchoring points for a cabover camper and HappyJack turnbuckles? | I spoke with my contact at Westin about your 1991 Ford Pickup. The Westin Bumper, part # 21007-92230 is designed to work well for...
Recommended Wheel Covers For 16" Wheels On A 1991 Jamboree Rallye
I have a 1991 Jamboree Rallye built on a F350 chassis. The RV has 16 wheels, and the wheel covers look the same as the Namsco Wheel covers. Your site shows these fitting 19 1/2 wheels. Do you have this style wheel cover that fits a 16 rim? |...
5th Wheel Trailer Hitch for a Flatbed 1990 Ford F-250
I have a Reese 14k 5th wheel hitch. What is the railing kit I need to mount it in my, 90 F250 lariat flatbed pickup. | Flatbeds are unique in that the bed is further from the frame than on a regular truck bed. The installation kits are not designed...
Can Gen-Y Receiver Plate # 325-GH-724 be Mounted Only Using the Top 4 Holes
I have a 1997 ram 3500 utility body with a lift kit. The truck currently has a bolt on pintle hitch that is mounted to the utility body/truck frame. I am looking to have adjustability or to lower it so i can tow trailers again. Is it possible...
How To Determine Fit of the Derale Fan Spacer Kit for Belt-Driven Fans On a 1987 Ford F-150
will your 3.5 cooling fan spacer fit my 1987 f150 5. 0 | I do have a way for you to confirm fit of the Derale Fan Spacer Kit for Belt-Driven Fans part # D31551 but I do not have any way to do this for you. Therefore, you will need to make sure...
Can the Pintle Hook Mount part # 63057 Be Used in Rise and Drop Position
Can this be mounted either way as in to lower the ball or to raise the ball? | Yes, you can use the Pintle Hook Mount part # 63057 in the rise or drop position. For a pintle hook and ball combo with a 2-5/16 inch ball you would want the part...
Will a Cushioned Ball Mount Work with Surge Trailer Brakes
I have a boat trailer with surge brakes, will the cushion affect the brakes or stop them from activating? | The cushion inside of the Convert-A-Ball cushioned ball mount # AMSC4 would have only a slight affect on the surge coupler on your trailer....
Recommended Wiring Installation of Prodigy P3 in 1987 Ford F-Series Truck
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional. 1987 Ford F-series truck. | The Tekonsha Prodigy P3 # 90195 is an excellent choice of controller. It has preset brake boost options and an easy to read LCD screen....
What Are Mounting Hole Dimensions On Draw-Tite And B&W Hitch For 1987 Ford F-250 Truck
Hello. I am replacing the hitch on my 1987 ford f250 with standard bumper. I have an eaz-lift-V5, but am looking to install a higher capacity hitch. How ever, i would perfer not to drill any new holes in the frame rails. The distance between...
Tailgate Assist Recommendation for 1989 Ford F-350
I am looking for a tail gate assist to fit my 1989 ford F 350 lariat dual wheel truck, will this fit? is it durable or how often does this unit good for, thank you for you time. | For your 1989 Ford F-350 we have the Hopkins EasyLift part...
Recommended Heavy Duty Snow Tire Chains For a 1986 Ford F-350 With 235/85R16 Tires To Plow Snow
I am looking for snow chains of heavy quality for a LT235/85R16. The 1986 Ford F-350 is used for plowing snow. I see you have chains for a 1988. Will those fit a 1986 and if not what do you recommend. Single tire, not dual. | I recommend...
Filter Your Search
Contact and Help