!Wildcat Maxx Travel Trailer  x   >   1993  x   >   !1225  x   >  

Hello Im looking to swap out my yakima Outpost towers with overhaul towers will the mounting plates to the truck bed work with the overhaul towers? | Yep, the mounting bases are exactly the same for the OverHaul HD and OutPost HD ladder racks....

My wiring was so not wired correctly so Im starting fresh. Ive done some reading and noticed these trucks have less than adequate wiring coming from the headlight switch which can cause failures to the switch itself due to overload. My trailer...

How far do the U bolts stick out past the saddle after you put it around a PVC pipe? Would they go through a piece of 3-1/2inch channel? | I checked with Buyers but they did not have this information on the Buyers Products Conduit Carrier Kit...

I have a 1993 F350 Cab Chassis 34 Inch Frame Im looking for a 16K Fifth wheel that I can use with it. This would be mounted on an Open Frame No Flatbed Are there any kits you can recommend for me to use? | Since your 1993 Ford F-350 is...

Which Model Will Work for My 1993 Mazda Miata 2-Seater Convertible? | The Hollywood Racks Express 3 Bike Carrier # HRE3 is the model that will fit your 1993 Mazda Miata coupe convertible. |

What is the color to color on the wiring fir a 93 ranger | Sounds like you are thinking about hardwiring a 4-way to your 1993 Ford Ranger. Before you do so you should know that you won't be able to successfully pull that off due to the vehicle...

will the steps fit 1993 f150 extended cab | I do have some nerf bars that will fit your 1993 Ford F-150 Super Cab. The Westin Signature Series Round Nerf Bars - 3" - Black Powder Coated Steel, part # 25-0625, will fit your vehicle. The Aries...

I need new u bolts for my trailer axels that are 2.5 inches round | It sounds like you have 3,500 lb axles that are typically 2-3/8 inch diameter and could easily be rounded up to 2.5 inches. For your U-bolts, I recommend the CE Smith U-Bolt...

How wide is this hitch. | I spoke with my contact at Curt about hitch # C13902. The overall width is approximately 41-1/2 inches. The bolt holes are approximately 39-1/2 inches apart on center. |

I have a 93 Mazda B2600i 4x4 cab plus truck. I have a tandum axle utility trailor that currently has a 4 poll harness. Can I change to a 6 or 7 poll harness so I can add back up lights and maybe an additional power source. I just added LED stop...

What part number fits a 6 3/4 bed? My truck is a 93 ford f150 short bed measures at 6 3/4 | The correct tarp replacement for your Extang Tuff Tonno Soft Tonneau Cover - Snapless J-Strip #EX14940 is the Replacement Tarp for Extang TuffTonno Soft...

You have a video showing the install of product 118348. When I search for this product I get product 118349 which I am told it will not fit my 93 jeep grand Cherokee Laredo. Im wanting the product in the video. | The T-One Vehicle Wiring Harness...

I purchased this brake controller to use on my 1993 Ford Ranger. Is there a particular harness I should use? There is on trailer wiring on the truck that I can see. | Thanks so much for purchasing the Tekonsha Prodigy P2 Trailer Brake Controller...

where would i find the conector for the rear harness on a 93 G20 markIII conversion van to hook up the T-connector C55338 | The Curt custom fit vehicle wiring, # C55338, connects to the vehicle behind the tail lights on the 1993 Chevy vans....

I am curious about the installation of etrailer Class 3 Trailer Hitch - 1993 Dodge Dakota. My bumper has a ball hitch on it. Will this product fit? I can send pictures if helpful. Thanks | The etrailer hitch # e53AR does fit your 1993 Dodge...

Hi Suggestions for locking HappiJac turnbuckles to deter theft | HappiJac hasn't really developed a great solution for licking their turnbuckles yet. There are some options, but it also depends on what HappiJac turnbuckles that you have. If...

if Im reading the instructions right the only tool I would need to install on a 1993 Subaru Legacy sedan is a 1/2 inch wrench? I ask as Im in a rather remote area without any tools. Also do I have to lift the vehicle to install or can I lie...

What are the deminsions of the jack bearing BD500223 | I spoke with my contact at Bulldog about the Replacement Thrust Bearing, # BD500223. He stated that the bearing has an inner diameter of approximately 0.525 inches, and outer diameter of...

Hi, I want to know if I need any other hardware to install. My brother in law has a 1993 jeep wrangler that had a hard top on it. he removed the hard top and wishes to install a soft top. i need to know if he needs any hardware. please see attached...

I am looking for a set of bags to help when i have loaded my 2002 Summerwind Truck camper. The vehicle has been lowered approx 4 inches. What set would you recommend for the rear only | Since your 1993 Chevrolet 3500 Dually has been lowered...

looking at the rightline truck bed tent. I have an 8foot box now. at some point might be a few years will upgrade to a crew or extended cab truck with a shorter box. would a 8foot rightline tent be usable in a shorter box might hang over tailgate...

I have 1993 F250. The current trailer brake controller on it is ancient. When I apply brakes it is all or nothing and locks up easily. I was told to get a newer brake controller that is adjustable to fix this. But which one? Please advise! |...

Will it fit a 1993 f150 short bed | For your 1993 Ford F-150 headache rack, # DZ95050R, is indeed a fit. I have also included a link to all of the headache racks that are confirmed to fit your truck. |

Will this work on a Toyota 1994 1993 T100 one ton Itasca Spirit? | Yes the Timbren Rear Suspension Enhancement System Item # TDVR05091 is compatible with the 1993 Toyota T100 Itasca Spirit Motor Home |