!Wildcat Maxx Travel Trailer  x   >   Timbren  x   >   !CB Series  x   >  

Looking for a set of airbags for my 97 f350 that won’t interfere with my BandW turn over ball | I do have suspension enhancement options for a 1997 Ford F-350 but air bags won't be one of them as they all mount in the same spot as the in-bed...

I am wrapping up a pop up camper build and need to upgrade the suspension after adding all the new weight. I can not find a direct replacement for our idler axle dimensions and feel that I will need to go axleless. What would be our best option...

2018 gmc Savana 3500, rear wheel drive, dually. It’s a box van. Will one of your kits fit this application? Thanks | We do have a potential option for you, but the Air Lift LoadLifter 5000 # AL88205 is only going to fit vehicles with a fully...

What is the overall diameter of Timbren TA25722-90F00? What about the inside diameter of the center bushing? | The Timbren 1/2" Spacer For Raised Frame Vehicles # TA25722-90F00 has an outer diameter of 4" and a bushing (inner circle) size of 1/2". |

I have a 2019 thor ace 27.2 motorhome and my question is I need proffessional advice on the timbren or sumosprings for a easier ride. I was thinking of sumospring ssf-170-40-2 for the front and the Timbren tfrf53a for the rearI don’t want to...

What timberen would fit my 2000 Chevy Silverado 1500? | We have both front axle and rear axle Timbren rubber spring suspension enhancement kits for your 2000 Chevy Silverado 1500 that are displayed on the linked page. You can also see other...

Hello, Can recommend a Timbren rear suspension that would be best for my 2010 4WD Tacoma carrying a 1000lb camper. With cargo and people I will be about 300lbs overweight. Thank you. | There are a few different options that we have for you...

Does anyone make a air bag kit to fit this truck? | I have a different rear suspension enhancement option for you, but there is not an air helper spring kit currently made that will fit your 2018 Chevrolet Silverado 3500 Cab and Chassis. The...

jameson c recommended ras34fr for the rear suspensionon for my truck so I ordered it, my question is if the truck is not level what would you recommend to level the front end? | For front suspension support for your 2020 Toyota Tundra we have...

Im looking to replace my suspension on my gooseneck trailer wondering which product to use my trailer is a dual tandem axle trailer rated at 24k gvwr if Im understanding correctly the 14k rated product you have would be only for dual 7k axles...

Does the tire pressure affect the ride of the motorhome . I have a 2016 Thor ace 30.1 18,000 lb and they are saying some have 100 psi per tire and they say to lower to 82 psi would that help feels like every bump i hit rattles the motorhome...

Hello, A bit confused on part # I have a 2021 GMC Sierra 1500 AT4 and looking to purchase the correct rear bump stop I look forward to hearing from someone. Thx | The correct Timbren Rear Suspension Enhancement System for a 2021 GMC Sierra...

Will this fit my 2010 Aliner Ranger 10? It has a 2,000 lb torsion axle | I do have an option for you but the 2010 Aliner Ranger Trailers all use AL-KO axles and there is not a bolt-on lift kit for these. The only option we can provide to lift...

Hi, I have a 2014 Ram 1500 Quad Cab ST. I have been finding Timbren # DR1500DQ but your site is the only one with Timbren # TDR1500DQ part number. Whats the difference? Also the Timbren factory states that the DR1500DQ will not fit the ST model....

Is this product compatible with OEM Air Ride suspensions for H2s? Thank you. | I checked with Timbren and they have confirmed that the Timbren Rear Suspension Enhancement System # TGMRH2 that you referenced is compatible with your 2005 Hummer...

Looking for support for rear suspension. Must work with off road suspension.. 2021 Off-road RAM What could you recommend? | For your application you need jounce-style suspension enhancement as all of the air bag styles won't be compatible with...

Hi I would like to buy two parts for suspension enhancment for Lexus go 460. I wanted to know the weight of each part for the front and back? Thanks. | The Timbren Suspension Enhancement System # TTORSEQ that you referenced for the rear axle...

Is the 3500 lb rating for each side or is that the 2 together ? | The weight capacity rating for a Timbren axle-less system is a total for the entire system. They're rated in comparison to standard axles that they replace. So the 3,500 pound...

I am considering installation of Timbrens on 2023 Entegra Vision 29s on a 2022 ford f53 chassis with the v8. GVW is 18000. Do you recommend installing both front and back or if I choose only one, front or back gives the best results - body roll...

IM HAVING A CUSTOM BUILT TRAILER MADE OUT OF ALUMINIUM IT WILL HAVE 2 AXLES AND BRAKES AT EACH WHEEL. MY CARRY WEIGHT WILL BE 10K AND MY TRAILER WEIGHT WILL BE 2500 LBS. I WILL BE HAULING WITH THIS TRAILER 5 DAYS A WEEK. WILL THEY HOLD UP TO...

Looking for spindle and hub for ice house trailer. The spindle will go thru a 2x3 steel tube. Looking at the Item # TRU74FR for ease of alignment. Open to suggestions. Like to use 14 or 15inch wheels. House should be under 1000 lbs. Thank You...

I have a ubuilt trailer that the original frame is at 46 inch on center. The outer rail of the frame has been extended to 61 inches. Now hub to hub the axle would have to be 72 inches. Can I relocate the spring perches to 46 from 58 inches....

I have a 2015 ram 3500 4x4 dully i pull a 4 car hauler Kaufman EZ-IV total weight trailer and 4 cars 25000 pounds so my rear axcel becomes like a V shape when i have the trailer loaded should i buy the T94VR or F2615 thank you | Great question....

Hi, I am looking for a replacement axle, hubs, and springs for a Magic Tilt BV16XWW boat trailer, built in 2005. Do you know what parts I need for this trailer? I tried contacting Magic Tilt directly, but because my trailer was older than...