!Monaco  x   >   !1955  x   >   PackEm  x   >  

What is the distance between the two pre-drilled holes on the PackEm Trimmer Rack # PK-6? | I went out to the trailer on which we installed Pack'em trimmer rack # PK-6 and found that the mounting holes are 10 inches apart on center. |

. . . of my 2011 Escape to secure it to a flat wood floor car hauler? The points are in the sub frame and body rails. I use a T hook to attach the 2inch ratchet straps from the stake pockets. Should I try control the body movement or go to...

Hello,I recently purchased and reviewed the Packem 3 trimmer rack for an open trailer and LOVE it. I am looking for a Backpack rack to add to the unit and noticed the PK-OP1 accessory. I was wondering if the backpack blower part of the accessory...

1. Will the stihl br 200 backpack blower work with this kit with no additional parts needed? 2. I have the stihl kombi system so I only have one engine, do you offer a kit with all the same features but with only one or two trimmer holders?...

Is it common for customers to buy 4 of these? I have a 2016 Can-Am Maverick max 1000R X RS that is 64inch wide, a little over 12foot long, 6.5foot tall, and weighs about 1750lbs. I know that it is good to transport UTVs in this fashion rather...

I purchased this rack back in the summer time and a couple of the locks have already rusted so bad that I can not get them to close. I have tried to go out and purchase more but can not find the right size so it fits the holes in the trailer....

What is longest length ladder you can carry?PK-28WL2-BMH | The Pack'Em Ladder Rack for Side Rail of Open Air Trailer - 2 Ladder # PK-28WL2-BMH is not rated by the length of the ladder but rather by the maximum weight of 75 lbs per ladder. Although...

Hi there. I was wondering if you could attach the trimmer rack to the side of a truck bed instead of a trailer? | Yes you could install the Pack'Em Rack for Open Utility Trailers - Holds 3 Trimmers # PK-6-OP1 in the bed of your truck technically,...

Can you offer a rack that will hold 3 trimmers and 2 blowers? | Best option we have for that would be the Pack Em Rack part # PK-6-OP1 which will cover the 3 trimmers and one of the blowers and then use the # RA-39-BMH for the other blower and...

Will this accommodate my Stihl BR340 and Husqvarna BT350 ? I know it only holds one but I need to know if it will hold either. Thanks | The Pack'Em Blower Rack # PK-6-OP1 that you referenced will accept your Stihl BR340 Backpack Blower when...

Will this rack hold a ladder? | The Pack'Em Rack # PK-6-OP1 really is intended for holding a trimmer. I'm not saying that you couldn't hang a ladder from it, but my concern is that the shape and size of the hooks may not accommodate some ladders...

If i buy the set would it be ready for any brand of equimpment so like universal like | Adapters are required for certain blower packs, but in general the Pack'Em Rack for Open Utility Trailers # PK-BM-OP1 fits most out there as-is. The Stihl...

I was wondering if there was a comparable item to carry Kayaks with. | We do offer a range of different utility and kayak carriers that can be used to transport kayaks, paddle boards, surf boards and canoes. These include simple value-priced...

Can I hold a redmax weed whip and redmax edger with one of your setups | Yes you could hold either of the Redmax trimmers with the Pack'em trimmer rack for utility racks part # PK-6S2 that you referenced. |

will these fit a rackem pk-6 weedeater racks and if not what would i need to get to put this on my trailer and also does the package come with upper and lower racks | The Open Utility Shovel, Rake and Broom Holder # RA-23 that you referenced...

Will these work on a pipe trailer? | The Pack'em Trimmer Rack for Utility Trailers # PK-6S-6S2 you were looking at is designed to be bolted to flat portions on your trailer, but can be made to work on your trailer with round tubing instead...

I am interested in purchasing 4 atv wheel chocks. I would like to make them quick disconnect for I use my trailer for many uses. 1. Do you sell the attachment plate ? 2. Do your wheel chocks accommodate a 8inch wide atv tire? Thank you...

What is the distance center to center of weedeater position. In other words, what is the measurement from rack to rack? | There is no recommended center to center distance for the Pack Em Trimmer Rack, # PK-6, but they must be mounted a minimum...

Where are the PK-SPTD unis manufactured? What country? | The Stake Pocket Tie-Down Anchors # PK-SPTD are is manufactured in China. If you are looking for an option that is manufactured in the U.S., I recommend the Brophy Stake Pocket Tie Down...

Can these be used for an in closed trailer? | Yes, the Pack'em Trimmer Rack for Utility Trailers # PK-6 simply bolts onto the railing of a typical utility trailer so you could just as easily bolt it to your enclosed trailer. I have personally...

I was wondering if the pk-6-op1 backpack blower rack holds echo products because I would really like to purchase the PK-6-op1 as soon as I know that it does? | The Pack Em Rack, # PK-6-OP1, will hold an Echo backpack blower, but you will need...

Do you offer ladder racks as an accessory for your trailers? | The Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 has the versatility to fit many of our trailers even though they are not enclosed. The Pack'Em Ladder Rack Bracket Kit...

2014 Honda Pioneer 700 about 1500lbs. which would work for the rear wheels? I like the Erickson because the straps Ratchet Down. Trailer floor is 1x6 boards. One more question, Are replacement straps available for either? | Actually both the...

this says one kit is it for one wheel or two wheels | The Pack'Em Wheel Tie-Down Kit for Transporting Machines w/ Wheels, part # PK-WTD is designed to secure one tire in place on a truck bed or deck. |