What is the Recommended Distance Center to Center for the PackEm Trimmer Rack # PK-6
Updated 04/02/2014 | Published 04/01/2014 >
Question:
What is the distance center to center of weedeater position. In other words, what is the measurement from rack to rack?
asked by: Ken
Expert Reply:
There is no recommended center to center distance for the Pack Em Trimmer Rack, # PK-6, but they must be mounted a minimum of 3ft apart. Trimmers come in different sizes and lengths, so it is best to mount the racks to fit your specific trimmers. The distance between the racks will also depend on where you plan on holding the trimmers. Typically, trimmer racks are mounted to hold the trimmer at the trimmer handle and on the neck, about a foot or two from the trimmer head.
If you measure from your trimmer handle (just behind the trigger switch) to an area on the neck or shaft, a foot or two from the trimmer head, that will give you a good idea of how far apart you will want to mount the trimmer rack on your trailer.
Product Page this Question was Asked From
Pack'Em Trimmer Rack for Utility Trailers
- Trimmer Racks
- Utility Trailer
- 3 Trimmers
- Pre-Drilled Holes
- Locks Included
- PackEm
more information >
Continue Researching
- Shop: Pack'Em Trimmer Rack for Utility Trailers
- Video: Ultimate Overview of the Pack'Em Trimmer Rack for Utility Trailers
- Q&A: Can Pack'Em Trailer Racks be Welded to Trailer Instead of Bolting On
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Availability Of 5 on 4-1/2" Hubs For A 3/4" Spindle
- Q&A: Wireless Towing Lights That Can Be Used On A Trailer
- Article: How to Measure a Trailer Axle
- Q&A: Availaiblity of White Half Moon Trailer Vent
- Q&A: Trimmer, Spool and Blower Rack Recommendation for Utility Trailer
- Q&A: What Drum do I Need to Replace My Lippert Drum with 696690 Stamped on it?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Choose a Trailer Hitch Coupler
- Article: How to Measure for Trailer Hitch Drop

