!Monaco  x   >   !South Fork Fifth Wheel  x   >   Ultimate Jack  x   >  

Do you make them in side winder for this trailer? My issue is clearance. I need to maximize it as much as possible. Thanks for looking... | I may have a solution for you, but the space where you would typically want to mount a swivel jack looks...

Do you have jack with the same functionality, but as a sidewinder? | I do have an option for you but I am not aware or any side mount trailer jacks similar to the Ultimate Trailer Jack part # 322-RDJ-2K in regards to how the mounting bracket...

What wheel do you recommend for the ultimate trailer jack? Thanks | The wheel caster you need is the part # JC-102 to be used with the Ultimate Trailer Jack # 322-RDJ-2K. |

I just purchased the jack and installed it. Then yeah then I read the instructions and noticed that they state 4 - CRITICAL you/I must Remove plastic retainer and apply either thread lock tape or locking compound to the threads of retainer bolt....

What are the measurements of the mounting flange slots from the adjuster ring | The slots on the Ultimate Trailer Jack # 322-RDJ-2K from the inside of the mount near the jack tube are 1/8" from the inside. The slot itself is 7/8" long putting...

Is the jack foot plate Item # JF-100-ZBK compatible with this jack? Looking for a low profile foot plate. | The Ultimate Trailer Jack part # 322-RDJ-2K should be compatible with the Replacement Footplate part # JF-100-ZBK. This is not something...

I would like an A frame trailer Jack that is easily removed or low enough to allow the tailgate of my pickup to be lowered | I have a recommendation for you as the Ultimate Trailer Jack # 322-RDJ-2K you found is our best solution for moving...

I’m interested in an A frame jack My current jack hits just barely my truck tailgate My current jack measurement from mounting bracket to top of handle is 13” Do you have any jacks that are approximately 11 1/2 “ from mount bracket to top...

I have a 2015 Clipper travel trailer that I tow with a 2015 Chevy traverse. Occasionally I hit the tongue jack will pulling it in or out of spots. Do you have any replacement Jacks or ideas to give me a little more clearance? Thanks | Yes, the...

Im converting my cargo trailer to a camper/mobile ham radio station. I want to go off-road with it and have some concerns about the jack as well as tire pressure. My jack is the A-frame style and projects down. I worry about catching it on...

Do they make the same jack with the outside tube having a diameter of only 2 inches? | I do have an option for you but the Ultimate Trailer Jack part # 322-RDJ-2K only comes with an outer diameter of 2-1/4". The 2" outer diameter tube jacks...

Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2 Lift - 2,000 lbs 322-RDJ-2K Do you have a wheel for the end of the jack? | Yes, we do. It is the Removable 6" Caster for 2-1/4" Trailer Jacks item # JC-102. This has been confirmed to work...

do you have an electric jack that fits this triangular pattern? It doesntfoot have to be rated very high weight capacity | The triangular pattern you see on the # 322-RDJ-2K and your trailer is pretty standard for A-frame trailers. For an electric...

I have an older homesteader trailer and the jack gave out. Can you please recommend a leg jack with clearance for a tailgate? Hopefully the pictures help. | Unfortunately I did not get the pictures, but I do have an idea of what you are looking...

On the Ultimate A-frame trailer jack, can you tell me the measurement from the mounting bracket to the top of the jack when the jack is fully extended down? Also, what is the measurement from the mounting bracket to the bottom of the jack without...

Are most or all the same size and bolt pattern? | Yes, nearly all trailer a-frame bolt patterns for jacks are the exact same so you don't have to measure or verify anything to know that the Ultimate trailer jack # 322-RDJ-2K will fit your trailer. |

I have a very light trailer I put my 14 foot Jon boat on and move it about with my 4 wheeler. I have found that, often times, the jacks dont come down far enough to easily hook up the ball to the hitch. Do you have a jack that would have a small...

How low can I the tongue on my trailer with the Ultimate Trailer Jack - A-Frame Item # 322-RDJ-2K With the caster installed - My current one does not get low enough to get my Chalet A frame in the garage without removing the castor and using...

Im replacing the a frame Jack on my trailer. Some give the mounting hole distances and some dont. Is there a standard? | Yes, about 99 percent of A-frame jacks use the same mounting pattern. The holes are generally 3 inches apart on center...

Can I order a replacement handle for this jack? The handle fell off of mine on the highway. | The knob on the handle of the Ultimate Trailer Jack # 322-RDJ-2K you have is not replaceable by itself, but you can replace the entire handle using...

how far does the pin stick out from the jack. I have a winch that is close but not up against the jack and need to know how much clearance I need directly behind the jack post for the pin to operate. | I went out to the warehouse and found that...

I have a RAM jack 3000lb support/2000lb jacking my Homesteader trailer. Will this jack replace it as far as the mounting hole placement or, if available, is there a template of the jack mounting hole pattern that you can send me. | Yes you can...

Hi I’m looking for a new trailer jack for my American hauler The three point bolted on one is bent and doesn’t work now. Which jack would work and is there one that a wheel or like a quick and raise before you have to start cranking it? Thanks...

Hi. I need a trailer jack. Its for a cement mixer. the tongue of the cement mixer is very low to the ground. I have a jack on another nixer and works well. But that tongue is higher up from the ground. I need a trailer jack with a 6” wheel...