!Magnum  x   >   !Land Yacht Travel Trailer  x   >   !xc90  x   >   Pro Series  x   >  

Is this shank forged or welded construction? I have another brand welded hitch shank that I am replacing and it has worn on the top where it sits in the receiver. I want to avoid a similar issue. | The Reese # RP69FR is a welded together part....

I have a 2012 F150 5.0 liter that I want to use to pull a 19 ft travel trailer with a tongue weight of 375 lbs. The vendor for the trailer is telling me I do not need a weight distribution hitch but I do need a friction sway controller. He...

What size hole is on the jack my present jack has a 2-1/2” hole so I will only need to replace jack portion | The snap ring hole of the Pro Series Round, Snap-Ring Swivel Jack # PS1401140303 that you referenced that mounts on the trailer has...

I have a 2016 F150 with factory receiver and Blue Ox WDH and tow a 7900 lb. toy hauler. Will this work to keep the up and down movement of the hitch to a minimum? At the furthest point of the hitch I have close to 3/4inch up and down movement...

I have a off road tear trailer in the back country i sometimes have to un hook and swing trailer by hand no room to back up with the pickup Is there a jack made with a inflated tire. I find myself in rock, sand, gravel. Lots of non paved surfaces....

Hello, Could you tell me what the distance from the hitch pin hole to the back of the plate is on this model? I am in need of a pintle hitch to clear my bumper on a utility truck and need atleast 7 1/2inch from hitch pin to the back of the plate....

Hi our Reece breakaway tow unit is not charging. With the battery disconnected I have 14 volts but once the battery is connected it s to 12 volts please let me know what you think Im considering bypassing the lid and going directly to battery...

Whats the difference other than price? | Essentially the two kits are the same thing just under a different brand name with the # 50-85-313 being Tekonsha and the # 50-85-315 being a Tow Ready. Functionally there is no difference. |

Will a Curt 17124 shank work with the pro series PS49903 WD system? | Yes, the Curt Weight Distribution Shank # C17124 that you referenced will work with the Pro Series Weight Distribution System # PS49583 that you have. |

I have a v-nose trailer. I am trying to figure out roughly how far back the chain hangers for this model have to be mounted. I prefer to do my research now so that I dont have to purchase additional chain hangers. Thanks! | If you measure 31...

I have a 2006 toyota land cruisser prado and toy an 2008 coachmen catalina 20 RD, is these the right WDH for me, what are the variable to consider? Thanks. | The key to selecting a weight distribution/sway control (WD/SC) system is to know your...

regular cab I saw where you said in another answer that you would send installation instructions for the generic install kit that comes with this package. I would be very interested in seeing them. I used the instructions that came with them,...

Theres a customer photo from Jeff D. that shows an extension added to the handle. Is the handle easily removed? | The handle on the Pro Series Square Jack with Footplate part # PS1401600383 is not easily removed. We don't recommend this but...

Truck 2011 GMC Sierra 1500, trailer is a 2019 Carry on Trailer. Dexter twin 3500 lb. axles. Pilot brake controller unknown model number. Both items purchased used. All lights work as they should. The problem is I have to have the controller...

I have a shank for a weight distribution hitch, I no longer own the trailer or distribution hitch and want to try and reuse the shank. Do you guys carry a boot on ball or something to mount to it to use it as a standard hitch? | While there...

I have a WD shank hitch bar 63970 which I used on my GMC 1500. I bought a 2015 dodge 2500. I need a new shank to drop my trailer tongue 2 more inches. Which one should I purchase? Thank you for the help | The shank that you have now should...

I bought a 24 foot forest river travel trailer and a curt round bar hitch was installed on my 2007 dodge pickup. I have had a lot of trouble connecting and disconnecting from the trailer ball. I have been watching your videos and now I see why....

I noticed that this unit says backing not allowed. My question is do you need to remove only the sway system or the weight distribution bars when backing the trailer? | You would only need disengage/remove the sway control bar to be able to...

WHAT IS THE DIFFERENCE BETWEEN THE RP-30092 AND THE RP-30048 | The biggest difference between the Pro-Series Slider # RP30092 and Reese Slider # RP30048 is the number of rollers in the slider. The # RP30092 uses 4 rollers whereas the # RP30048...

I have a 2008 Aerolite 30foot trailer. It has a 6000lb GVW and 500lb TW. My 2015 Dodge Durango has a 6500lb GVRW. There isnt much cargo room in the back of the Durango but we have two kids that sit in the third row seat which I believe will...

We recently repainted one of our 16 ft, 3 axle gooseneck grain trailers. In the process, I completely re-wired the lights and 12inch electric brakes. For the brakes, I put a junction box on the front of the frame that is fed with 12 gauge 12v...

I have to replace the boat trailer jack on my Chaparral 21 foot trailer. I ordered Fulton XLT Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 12inch Lift - 1,500 lbs- however, it only fits a 3inch x 5inch trailer neck. My trailer neck...

Please provide the center to center bolt hole distances for the mounting plate on the Pro Series Trailer Jack - PS1400300303. Thank you. | For the Pro Series Round, Snap-Ring Swivel Jack, # PS1400300303, the bolt hole pattern on the mounting...

Will this wide wheel fit the jack on my Wells Cargo with a standard 2 jack tube? | I do have a solution for a replacement wheel for your standard 2 inch jack tube, but the Fulton Twin-Track Wheel Assembly, part # F500266, will not work. This...