MORryde X-Factor Crossmember that Fits 2021 Keystone Montana 3120RL
I would like to purchase two Moryde x-factor crossmember for our 2021 Keystone Montana 3120RL fifthwheel but I am not sure which crossmember is the correct item that will fit. Id attach a photo if this system would allow. Thank you. | The...
Gen-Y Shock Absorbing 5th Wheel to Gooseneck Pin Box for 2019 Keystone Montana 3121 RL Camper
which gen y hitch should i look at to go on a 2019 Montana 3121 | It appears that the 2019 Keystone Montana 3121RL came with with a 1116 or 1621 pin box. You will want to locate the label on the pin box for either of these two numbers or confirm...
Center Cap in Black For 16 Inch Trailer Wheel
I have a 2017 Montana 5th wheel with Dexter ez-lube axles. I need the trailer wheel center cap black to replace one I lost. The cap has 6 studs and the inside diameter of the cap is 2 1/2 . The outside diameter is 2 7/8. Can you hook me up...
Can 235/80R16 Load Range F Tires Be Upgraded To Load Range G
currently running a 235/80r16 load range f tire on my fifth wheel. can i safely move to a g load range tire with the same size? | Yes, it would be safe to move to a load range G tire like the Provider ST235/85R16 Radial Trailer Tire # TTWPRG235R16....
Troubleshooting Tekonsha Prodigy P2 Brake Controller Numbers Jumping When Pressing Brakes
I have an 2001 F350 DRW pulling a 2009 Montana 3605 RL and I am having an issue with the Prodigy 2 Brake Controller, It was working fine. But hooking up the for the first time this year I am not able to adjust the Controller. Everything appears...
Troubleshooting Landing Gear Fuse Blowing On a 2009 Keystone Montana
I have a 2009 Montana 10th Anniversary LE 3605 the issue I am having is when putting down the landing gear the fuse for the system constantly blows. I went through 5 30-amp fuses before resorting to manually putting the gear down with the...
Recommended Suspension Upgrade For A 2019 41' Montana Fifth Wheel With 2 7K Dexter Axles
I have a 2019 41 Montana 5th wheel trailer with two2 7k Dexter axles which when loaded for travel weights around 16650-16700 lbs, with around 13400 lbs on the axles. Mostly towed on paved primary and secondary roadways. I want to upgrade my...
Snap Pad Fit for Lippert 6 Jack Ground Control 3.0
I have a 2021 Montana 5th wheel with the lippert 6 jack system Which would you recommend to me snap pads | We have the same # SP54FR4 SnapPad XTRA jack pads in a set of 6 as part # SP54FR6. If you click the provided link, you can see how the...
Interior Height of MORryde Sliding Tray MR97FR
CTG60-2648W. What is the inside height of the tray from floor of the tray to the top of the rail on the tray? | I checked directly with MORryde for you, who said the inside height, from the cargo tray floor to top of the tray, was 4.3 inches...
How Come Some Bike Racks Can be Used at Rear of 5th Wheel Trailer and Others Can't
Im researching bicycle racks for e bikes and I have noticed that many say NOT to use on the rear of a 5th wheel RV. My question is why the warning on some and others say they can be used on a 5th wheel RV. Thank you for your time | The issue...
How To Confirm Fit of MORryde CRE Shock Absorbing Suspension Equalizers for Tandem Axle Trailers
Will the MR27ZR kit replace my existing system which is a LRE morryde system? This is on my 2008 Montana fifth wheel | In order to confirm fit of the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers you'll simply measure...
Correct Disc Brake Conversion Kit for 2020 Keystone Montana Fifth Wheel with 7K axles
I have a 2020 Keystone Montana. I am interested in purchasing Item # HSE7K-T1 to convert my 5th wheel trailer to hydraulic disk brakes. I have attached a picture of the axle label. What bearings would I require for my axle? Is there any...
Spigot to Hub Black Water Tank Valve With 72 Inch Cable
My Valve looks exactly like the Bristol but does appear to be spigot to spigot. Mines definitely 72” cable. Please look at pics and tell me if it’s spigot to hub? | Thank you for the photos! Based on that it looks like you have a spigot to hub...
Not Getting Power to Lippert Ground Control 3.0 After Replacing Trailer Batteries
I have been sitting in the same park for the past 2 1/2 months on shore power. Went to check the Lippert 6-point leveling system to see if I was still level just had front two legs replaced prior to coming here. When I turned on the control...
Solution To Transport One Bike On A 2021 Keystone Montana 5th Wheel That Sits Too Close
When carrying a bike on the rack behind a fifth wheel can you carry the single bike on the slot farthest from the hitch instead of closest to the hitch.? The handles on the bike are 26 inches and the one is going to come REALLY close to the...
Replacement Rocker Switch for Lippert Hydraulic Slide Out
I have a 2020 Montana 5th wheel..I need a 6 prong rocker switch for the dining and kitchen hydraulic slide... | Do you know what brand of slide out you have? | It is a Lippert hydraulic system.. | Sounds like you are looking for the Lippert...
Can the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter be Welded?
Can you weld on the CAB-C5G if you have no bolt holes and cant drill any? | Yes, you can but the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter item # CAB-C5G was designed to be installed with bolts. The main issue would be is that...
How to Pick the Correct Replacement Slide Out Seal for a 2007 Keystone Montana
we have a 2007 Raptor 40 toy hauler. mfg date 11-16-2006. serial # 4YDF371247R801754. Looking for a 77 top kitchen slide seal. | It sounds like you might be looking for a replacement seal for your slide out? If that's the case, then you're going...
Roof Vent Cover that Can Fit MaxxAir Roof Vent of RV
Will it connect to the factory tabs of the Maxx air fans? | Since you have a MaxxAir roof vent currently the cover you'd need is the part # MA00-955003 for a solution that would attach directly without modification or drilling. The # DMC38FR...
Is the Fin for the Safety Pin on the Convert-A-Ball # CAB-C5G Supposed to be Centered?
Is the fin for the safety chain on the CAB-C5G supposed to be centered on the king pin box? | Yes, the fin with the safety chain attached to it on the item # CAB-C5G is supposed to be centered on the king pin when you install it. I have linked...
Can Furrion Tankless Water Heater # FR93FR Fit 2015 Keystone Montana
Will this water header work on a 2015 montana 3402rl fifthwheel | The Furrion RV tankless water heater part # FR93FR was designed to basically fit all RVs so it would work great in your 2015 Montana 3402RL and will give you basically unlimited...
Trailair Air Ride Pin Box Replacement for 1116 Pin Box on 2019 Keystone Montana
need the link to size up trailair or similar for 2019 Montana 42ft kingpin please part no. 2019 Montana has medium 1116 pin box does changing to a 1716 which is approximately 5 3/4 longer cause that much more leverage issue on frame. I can...
Lippert Model 1-065-041012-01 Motor Replacement
My landing gear motor assy is model# 1-065-041012-01. The gear box attached to the motor is in good condition but not the motor. Can I purchase just the motor to help keeping the cost down? | Yes you can just purchase the motor, in this case...
Can Furrion Vision S System View Behind You At all Times
Hello, I have a 2021 Montana 5th Wheel that already has the Furrion camera prepped on the back of the 5th wheel. My question is will this only work as a backup camera or can I observe the image while driving down the road? Are they typically...
Filter Your Search
Contact and Help