Replacement Y-Style Bow Stop for EZ Loader Custom Boat Trailer
I am looking for a bunk bow v -stop. I have a EZ loader 3300# capicity ser # 1L8FHEMA9HA027754 | EZ Loader doesn't list a specific bow stop for any of the trailers so you will need to measure to find the right fit. You need the shaft diameter...
Longer Roller Shaft Recommend to Install Endcaps on CE Smith Deep V Keel Roller Assembly # CE10405G
I bought CE Smith Deep V Keel Roller Assemblies CE10405G and I got these end caps too but I was told that we need a longer shaft to fit this end cap? I got everything from your website and it didnt mention anything about a longer shaft needed. Could...
Replacement Wobble Roller For A 1 Shaft on an EZ Load Trailer
I have an ez loader trailer with a 1 inch shaft The yates yr500yw7p is just a bit too small but the washers sw1000 fit well. Are these the correct wheels | The Yates Ribbed Wobble Roller - Heavy-Duty Rubber - 4-3/8" Diameter - 3/4" Shaft Item...
Solution for a 5 inch Bow Roller Assembly
Do you have this type roller to be used with a 5 inch roller bracket? | I have a 5 inch roller, but the largest Bow Roller Assembly that we offer is a 4 inch, like part # YR450Y-400Y. The CE Smith Deep V Keel Roller Assembly # CE10401G is 5...
Keel Roller Recommendation for Centering a 2004 Crestliner on 2004 Karavan Classic 3500 Trailer
Ive been fightig this for 8 years, loading this 1850 Sport Fish Crestliner on this Karavan trailer. 9 out of 10 times the boat never loads straight on the trailer. I was looking at this product only because again Im getting tired of tying...
Replacement for Keel Roller Marked 5213
my boat trailer has bow roller #5213 is the number on my old roller do you still have it the roller is 5 inch to 5 1/8 long. was made for smorker craft boat trailer I purchase my last ones years ago at horn ford mortors | Based on that part...
Bracket For The Bow Roller Assembly YR450Y-400Y
Do you have a bracket that works with this assembly? | The CE Smith Bow Roller Bracket for Winch Stands # CE31005PG will work with The Bow Roller # YR450Y-400Y. The bracket accepts any 3 inch to 4 inch bow roller or Y-stop. The bracket is made...
Replacement Wobble Roller Recommendation for a Yates 4" Roller with 5/8" Shaft
Hi, I’m trying to find a 4” wobble roller with 5/8” shaft. The brand I have now is Yates 343r-4p, but I will use anything compatible. Thank you! | For your application I recommend checking out the Yates Ribbed Wobble Roller # YR343R-5P which...
Blue 8" Keel Roller and Replacement Shaft and Nuts.
Hello, i want this specific roller in blue. In addition to the shaft and pal nuts YR800B..what of part #s will i need? I will be fully removing the old keel bunks from my trailer and replacing with 2 keel rollers...all old hardware is rusted...
Boat Trailer Wobble Roller with 5 Inch Diameter, 3 Inches Wide, for 3/4 Inch Shaft
I have 5inch diameter 3inch wide ~1-1/8inch ID black rollers on a 3/4inch shaft with a sleeve with ID 7/8inch and OD 1. What size PVC Yates or TIe Down rollers should I replace them with? | The Yates roller that you referenced, # YR500YW-6P,...
Replacement Keel Roller Assemble For a Boat Trailer Using Rollers on 1-1/4" Shaft
I need six 12" replacement keel rollers for a sailboat trailer. Their shaft diameter is 1 1/4. It looks as though 12 keel roller shafts only come 5/8 or 1/2. Any recommendations? | The only type of roller we have that fits a 1-1/4" shaft is...
Wobbler Rollers With 1-1/2" Long Bushing For 1" Shaft EZ Loader Magic Tilt Trailer
I have an EZLoader Magic Tilt trailer. The current wobble roller size is: 3inch x 5inch with a l-1/4inch hole, a 1-1/2inch long bushing and inside diameter of bushing is 1. Which roller do I order. I cant seem to find one with these exact...
Can Yates Ribbed Wobble Roller # YR500YW-8PEZ Work with 6,000 lb Boat
My rollers are 3” wide 4-1/2 diameter with 1” hole. My boat weighs 6000 lbs and wondering if these would handle the weight. I would need 32. 16 on each side. Or is there something better? | Yes, the Yates Ribbed Wobble Roller for EZ Loader Boat...
Replacement Bow Roller with Bell Ends for a 2011 Skeeter SX200 Boat Trailer
My EZloader trailer VIN begins with 1L8. 2011Skeeter SX200. Will this blue roller fit my trailer? | It would appear from the photo you attached that the distance between your mounting bracket is 4" wide which means the correct blue roller assembly...
How Thick is the CE Smith Crossmember Pad and Yates Keel Pad
What is the measured thickness of Item # CE16870 and Item # YR1203SB | The CE Smith Crossmember Pad part # CE16870 is 3/8" thick and the Yates Keel Pad part # YR1203SB is a 1/4" thick. |
Is There a Wobble Roller for a Boat Trailer with an Inside Length Less than 1-1/2"
I need new wobble rollers on my trailer 5 x 3 is fine but the inside shaft length needs to be less than 1 1/2inch do you have anything like this? | We have the Yates Ribbed Wobble Roller for EZ Loader Boat Trailers # YR500YW-8PEZ which has a...
Is the Yates Ribbed Wobble Roller # YR500YW-8PEZ Sold Individually
How many rollers are in this? | The Yates Ribbed Wobble Roller # YR500YW-8PEZ that you referenced is a single roller sold individually. |
Dimensions of YR510Y-4 Yates Boat Trailer Spool Roller
Hi- For the Yates Spool Roller for Boat Trailers - TPR - 5inch Long - 1/2inch Shaft Item # YR510Y-4, what is the diameter of the outer ends? A diagram would be helpful. Thank you! | The outer ends are 2-7/8 inches in diameter, this and other...
Replacing Wobble Rollers On An EZ Loader Boat Trailer
hello, I purchased an older boat on an EZ loader trailer. The rollers are very old and have a metal core. They are held on to the rocker arm with an 8inch x 5/8inch bolt. Will the 3/4inch shaft roller you sell work in this application?...
Looking for a Replacement Handle for a Knott Autoflex Hand Winch
The shaft with the handler on my Karavan trailer broke. Trying to find a replacement. attached are the pictures of the winch | If you were looking for a replacement handle, the hole opening on the Replacement Quick Attach Winch Handle for...
Length Of Shaft Needed For 12" Roller With End Caps On Both Ends
Hi, I am looking to install the Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 5/8" Shaft - Qty 1 Item # YR224-5 on the ends of a 12" roller. Can I use the: [Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel...
Is Carpeted Y-Style Bow Stop Normal for a Boat Trailer
Have you ever seen this carpeted. On the Mastercraft trailer it has a carpeted V bunk that the boat slides on as it approaches the stop where a pin and hook attach to it. Thoughts? | Hey Don, thanks for reaching out! Boat trailers are unique...
Recommended Roller Bunk Assembly for 3 Wide Trailer Frame
My trailer tongue is 3 inches wide. Dont the mounting holes need to be more than 3 inches wide so the mounting hardware can fit around it?? | Yes, the mounting holes on a roller bunk assembly bracket would need to be spaced apart farther than...
Inside Diameter of YR12000 Keel Roller With Plastic End Caps Removed
I have a 12inch keel roller with 1inch in diameter bar. I was wondering if this would fit if the white spacers can be removed? thanks | It certainly would. According to Bob Yates of Yates Rubber, the inside diameter of the # YR12000 keel...
Filter Your Search
Contact and Help