Hitch Extension, TorkLift SuperHitch Magnum, Camper Tie Downs, and Air Bags for a 2015 Ford F-250
Question:
Hello, I have a 2015 F-250 Diesel with 6, 3/4 ft bed. Looking to purchase a LANCE 865 8foot 7 truck bed camper. I also need to transport my 3,500lb Mustang. I am looking at buying a 20foot Enclosed trailer. The F-250 has LT305/65/18 BFG T/A KO2 Tires. So it should be able to take all the weight. I imagine ill probably need Airbags to assist with the weight I also imagine i will need the hitch extension depending on the camper. What all else would i need with this hitch to make it all work? Any concerns?
asked by: Grant W
Expert Reply:
Since the bed on your 2015 Ford F-250 is 6-3/4 feet and the camper is 8 feet, 7 inches you are correct about needing an extension. Otherwise it is possible for the truck to make contact with the trailer when turning.
There are several extensions that will word with the TorkLift SuperHitch Magnum Trailer Hitch # TLF1002-30 which does use a specific extension. I recommend the 21 inch long SuperTruss # TLE1521 because it combined with a ball mount will give you enough extension. You also may or may not have to extend out the trailer connector. If you do then you can use # TLW6021.
If you are also looking into custom fit camper tie downs for the truck then you can use # TLF2012 for the front and # TLR3504 for the rear (the rears are compatible with the SuperHitch Magnum). And for turnbuckles we have # TLS9526-2-LK for polished stainless, # TLS9529-2-LK for black stainless, and # TLS9522-2-LK for gray stainless.
Adding suspension enhancement is a good idea with a camper in the truck bed. Air bags are great because you can adjust them for the best ride quality and height adjustment after the camper weighs down the stock suspension. Since your truck has the diesel motor you can use Firestone Ride-Rite air bags # F2597. Short Bed Diesel F-250's have an exhaust sensor located on the passenger side frame rail where the upper bracket mounts for this kit. In these instances, relocation bracket # F5722 is required; sold separately.
If you want to add an onboard compressor system as well I recommend # F2158 which is a basic system. It adjusts the air pressure to both bags evenly and at the same time which is ideal for a constant load like an in-bed camper.

Products Referenced in This Question
Firestone Air Command Standard Duty Air Compressor - Analog - Single Path
- Air Bag Compressor Kit
- Wired Control
- Single Path
- Analog Display
- 100 psi
- Firestone
more information >
Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Vehicle Suspension
- Towing/Load Leveling
- Air Springs
- Heavy Duty
- Rear Axle Suspension Enhancement
- Firestone
more information >
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 21 Inch Extension
- Fits 2 Inch Hitch
- 7500 lbs
- TorkLift
more information >
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Truck Camper Tie Downs
- Front Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Truck Camper Tie Downs
- Rear Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Gray - Qty 4
- Accessories and Parts
- Truck Camper Tie Downs
- Turnbuckles
- Quick Disconnect
- Includes Locks
- Tension Indicators
- Frame-Mounted
- Stainless Powder Coated Steel
- TorkLift
more information >
TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Polished Stainless Steel - Qty 4
- Accessories and Parts
- Truck Camper Tie Downs
- Turnbuckles
- Quick Disconnect
- Includes Locks
- Tension Indicators
- Frame-Mounted
- Stainless Powder Coated Steel
- TorkLift
more information >
TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4
- Accessories and Parts
- Truck Camper Tie Downs
- Turnbuckles
- Quick Disconnect
- Includes Locks
- Tension Indicators
- Frame-Mounted
- Stainless Powder Coated Steel
- TorkLift
more information >
TorkLift Wiring Harness Extension for 21" SuperTruss Hitch Extender - 7-Way RV
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 7 Round - Blade
- Plug and Lead
- 7 Round - Blade
- TorkLift
more information >
Product Page this Question was Asked From
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2500 lbs TW
- 20000 lbs GTW
- 30000 lbs WD GTW
- 2-1/2 Inch Hitch
- 2 Inch Hitch
- 3000 lbs WD TW
- Visible Cross Tube
- TorkLift
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can I Extend My Hitch Without Using TorkLift Hitch and SuperTruss Extension
- Article: How to Mount a Truck Bed Camper
- Q&A: Is The B&W Heavy-Duty Trailer Hitch Receiver Compatible With TorkLift Camper Tie-Downs
- Q&A: TorkLift Tie-Downs for 2025 GMC Sierra 3500 Dually With Built-In Step on Truck Bed
- Article: Trailer Wiring Diagrams
- Q&A: RV Water Pump Replacement for Shurflo 2088-422-444
- Q&A: Correct TorkLift Tie-Downs for 2021 Ford F-350 XL Long Bed With Regular Cab
- Q&A: Difference Between TorkLift Tie Down Kits for a 2024 GMC Sierra 3500
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Camper Tie Down Option For 2023 Chevy 2500 Long Bed 4WD
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: The Best Boat Bumpers
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Trailer Hitch Installation Tips