Reducing Engine Oil Temperature Using Derale Tube-Fin Engine Oil Cooler Kit # 15505
Updated 09/09/2014 | Published 09/06/2014
Question:
Reduces the temp by as much as 50 degrees? If it has a thermostat, wouldnt this prevent the oil from dropping too low. Oil temp needs to stay high enough to burn out the condensation in the oil.
asked by: A. K
Expert Reply:
Typically a system like the Derale Tube-Fin Engine Oil Cooler Kit, # D15505, is used on vehicles where high oil temperatures are a concern, like one that is towing during the summer months.
The thermostatic adapter will allow oil that is cooler than 180 degrees to bypass the cooler.
The temperature of the oil when it entered the cooler will vary depending on the outside temperatures, driving conditions, how the system is set up, etc. Allowing the oil to flow through the tubes cools the oil but due to multiple variables, there is no guarantee as to the exact drop in temperature. As soon as the oil temperature drops to below 180 degrees it will bypass the cooler.
Product Page this Question was Asked From
Derale Tube-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter (Multiple Threads) - Class III
- Engine Oil Coolers
- Tube-Fin Cooler
- W/ Sandwich Adapter
- Class III
- 16-5/8W x 7-5/8T x 3/4D Inch
- With 3/8 Inch NPT
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Derale Tube-Fin Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Shop: Transmission Cooler
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Shop: Derale Tube-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter (Multiple Threads) - Class III
- Q&A: Best Hitch for a 2015 Honda Odyssey and Do I Need a Transmission Cooler
- Shop: Derale Oil Filter Relocation Kit - 22 mm x 1.5 mm Engine Filter Threads
- Video: Derale Engine Oil Coolers - Tube-Fin Cooler - D15502 Review
- Video: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets Review
- Q&A: Engine Oil Cooler with Thermostat for a 2006 Toyota Tacoma with V6 Motor
- Q&A: Engine Oil Cooler Recommendation for 2014 Ford Flex SE 3.5 V6
- Q&A: Is Derale Engine Oil Cooler Right For 2017 Ford Explorer
- Search Results: engine oil coolers
- Search Results: transmission coolers
- Shop: Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Q&A: Recommendation on a Hitch, Wiring Harness, Transmission and Oil Cooler for a 2011 Ford Flex
- Q&A: Are Special Connectors Needed to Install Transmission Cooler on a 2016 Ford Explorer XLT
- Shop: Spacer Washer for Fastway e2 Weight Distribution Head - Qty 1
- Shop: Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class II - Efficient
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Video: How to Choose a Trailer Brake Controller
- Video: Clean Up Your Trailer Wiring
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: trailer tires and wheels
on Engine Oil Coolers
