Bracket Dimensions for the CE Smith Side Angle Mounting Brackets # CE10211G

Question

Question:

CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair CE Smith Boat Trailer Part Code: CE10211G Hi Can I have The dimensions of this bracket? Thanks

asked by: Gabriel

0

Expert Reply:

I went out into our warehouse and pulled a CE Smith Side Angle Mounting Brackets # CE10211G to get some measurements for you. Check out the picture I attached to see them all.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I have attached a picture that shows the dimensions of the CE Smith Spool Roller Assembly for Boat Trailers item #CE32100G. It measures 2-1/4-inches from the bottom of its mounting plate up to the center of the rubber roller. Overall width is…

view full answer...

Answer 2

I went out to the warehouse and pulled the Universal Roller Brackets, #MBSPB, to take some measurements for you. From the center of the hole to the nearest edge of the flat mounting surface measures 2-11/16 inches. The bracket is 1/8 inches thick so…

view full answer...

Answer 3

The CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair #CE10211G have holes that are 2-1/4 inches on center and 1-1/4 inches on center in the other direction. I've attached a photo to assist as well as a…

view full answer...

Answer 4

The Yates Spool Roller for Boat Trailers #YR4163-4P has a polyethylene inner sleeve to allow for the roller to easily turn on the 1/2" shaft.

view full answer...

Answer 5

We do have some of the replacement rollers that will work for your vintage 1965 boat trailer, but we do not have some of the rollers you asked about. Thank you for the dimensions. For the very front keel roller I recommend part #YR5213-5. This…

view full answer...

Answer 6

A TPR roller like the #YR500YW-6P is going to be better than PVC. PVC is a cheaper product. TPR has the properties and performance of both PVC and rubber while having a higher tensile strength so it is going to be the most durable. I don't have a…

view full answer...

Answer 7

A keel roller is not designed to carry the bulk of a boat's weight. That is the job of the bunks, whether they are wobble roller bunks like yours, standard roller bunks or carpeted bunks. Also, it is not a good idea to mount any of these boat…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 12

Hi Leo; I would start by checking to see if there are axle tags on the axles. They will probably have the capacity on them or at least a serial number the axle manufacturer could use to identify the axle. If the trailer manufacturer is still in…

view full answer...

Bracket Dimensions for the CE Smith Side Angle Mounting Brackets # CE10211G

Product Page this Question was Asked From

Continue Researching