Spool Roller Options for Trailer Carrying 14-Foot Hobie Catamaran
Updated 08/26/2014 | Published 08/24/2014 >
Question:
The trailer I have for my 14foot Hobie Cat has fixed carpet-covered pieces of 2x4s that support the hulls. I want to replace them with spool rollers as in the attached photo I found on a Hobie forum. 1. Do you have something similar to the roller assembly in the photo that would allow bolting directly to the cross frame? 2. Otherwise it looks like Id need to use 2 U-bolts to mount the CE32150G to the cross-frame which would involve more cost and complexity. Can you suggest another mounting option? 3. Id prefer slightly wider rollers say 7-8 to make getting the cat back up on the trailer a bit easier. Are there other roller assemblies I should consider? Regards.
asked by: Jerry J
Expert Reply:
The CE Smith Offset Spool Roller Assembly # CE32150G that you referenced, as well as the other similar products shown on the link provided, all mount using user-supplied hardware. These are intended to bolt on directly, without U-bolts but rather with 7/16-inch or 1/2-inch fasteners you supply.
The CE Smith Offset Spool Roller you referenced is 5-inches. We do offer longer keel roller assemblies, from 5 to 12 inches, and these can be seen on the second link. These are offered with either rubber or non-marking thermoplastic rollers.
Product Page this Question was Asked From
CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5"
- Boat Trailer Parts
- Rollers
- Spool Roller
- Rubber
- 5 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: roller bracket
- Search Results: roller bracket boat trailer parts
- Search Results: roller shafts
- Video: CE Smith Keel Roller for Boat Trailers: The Breakdown
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 5"
- Shop: Yates Keel Roller for Boat Trailers - TPR - 8" Long - 5/8" Shaft
- Shop: CE Smith Offset Spool Roller Assembly for Boat Trailers - Galvanized Steel w/ Black Rubber - 5"
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel and Yellow TPR - 8"
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 8"
- Shop: CE Smith Keel Roller for Boat Trailers - PVC - 5" Long - 5/8" Shaft - Amber
- Shop: Yates Keel Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 5/8" Shaft
- Article: Where to Position the Trailer Axle?
- Video: Review of the Yates Spool Roller for Boat Trailers
- Search Results: roller brackets
- Video: Review of CE Smith Boat Trailer Parts - Galvanized Steel 5 Inch Offset Bracket - CES28JR
- Video: In-Depth Review of the Yates Spool Roller for Boat Trailers
- Video: An In-Depth Look at the CE Smith Adjustable Mounting Brackets for Keel Rollers
- Shop: Trailer Wiring
- Search Results: trim panel tool
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2015 Honda Odyssey
- Video: Review of Tie Down Boat Trailer Parts - Amber PVC Bow Roller Assembly - TD73VR
- Q&A: What is the Measured Height of the Roller to the Mounting Plate
- Q&A: Distance Between Mounting Slots of CE Smith Deep V Keel Roller Assembly
- Search Results: bow stops
- Q&A: Comparing PVC, TPR, and Polyurethane Boat Rollers
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: Why Are 5" Wide Keel Rollers Less Than 5" Wide
- Q&A: Parts Needed to Add a 5-3/8" Keel Roller to a Boat Trailer
- Q&A: Keel Roller Solution for Tracker 14 Grizzly to Help Center Boat
- Search Results: trailer parts


