Complete Hitch, Wiring, and Brake Controller Setup for a 2027 Toyota RAV4 Hybrid
Published 11/17/2026 >
Products Featured in This Question
Question:
I have a 2027 Toyota RAV4 Hybrid XLE without the factory tow package and we're looking at getting a small camper for weekend trips. It has electric brakes and a 7-pin connector. My RAV4 doesn't have a hitch or trailer wiring installed yet. What all would I need to get it ready to tow?
asked by: Kevin R
Expert Reply:
Hey Kevin! For your 2027 Toyota RAV4 Hybrid XLE you'll need a hitch, wiring, ball mount, and a brake controller. For the hitch I recommend the Curt # C34FR62ZY. This is a Class III hitch with a 2" receiver, concealed cross tube, and a bolt-on installation.
For wiring, you'll start with the Curt T-Connector # C34FR62FT. This plugs into your factory wiring and gives you a 4-way connector to power your trailer lights. Then you'll use the # ETBC7 kit to upgrade to a 7-way for your brake controller.
For the brake controller I recommend the Redarc Tow-Pro Liberty # RED52VR. The Liberty is simple, reliable, and won't take up space in the cab of your vehicle. The main unit mounts behind the dash so only the control knob is visible. The knob controls the braking power and acts as the manual override.
You'll also need a ball mount that matches your trailer's coupler. The adjustable etrailer ball mount # e66PR is a good option if you want flexibility for different trailer heights. If you measure the distance from the ground to the coupler we can dial it in further and get a fixed ball mount with the appropriate rise/drop for your setup.
What camper are you considering?
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Concealed Cross Tube
- CURT
more information >




Kevin
11/17/2026
We're looking at a small single-axle camper with electric brakes and a 2" coupler. Will the Redarc controller work with those brakes, and can I use the adjustable ball mount you recommended?