bing tracking image
Q & A Icon

Why Is My Rear Bumper Bulging After Installing an EcoHitch on My 2026 Subaru BRZ?  

Updated 11/16/2026 | Published 11/15/2026

Question:

I recently purchased and installed a hitch for my 2026 BRZ. Followed all instructions correctly. Appeared to be fine initially, but then I noticed the bumper showed a slight convex bump when looking at the horizontal lip below the trunk caused by the hitch. I purchased this hitch using the associated email listed in this contact for

0

Expert Reply:

Hey Dustin, thanks for reaching out. The EcoHitch Invisible Trailer Hitch # EH24CR is designed to fit your 2026 Subaru BRZ without causing the rear bumper to bulge or distort. Since you're noticing a slight bump along the horizontal lip below the trunk, I'd suspect the bumper cover isn't sitting quite right against the hitch assembly.

I'd recommend checking that the hitch is properly seated and that the bumper cover and its mounting clips are fully secured. Also, make sure the bumper isn't resting against the hitch crossmember, which could be pushing the plastic outward.

Can you send me a picture of the bump you're seeing? There is no way to add pictures to the comments on here, but you can email pictures to me and I'm happy to take a look.

expert reply by:
0
Jesse M

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>