bing tracking image
Q & A Icon

Can the Thule Van Lock Be Installed on the Inside of a Van?  

Updated 11/18/2026 | Published 11/11/2026

Products Featured in This Question



Question:

Thule Van Lock. Please consider this lock closely and see if it would work on the INSIDE of swinging van doors. It may have to be spaced so the parts dont rub as the door opens but seems like it would work. Thanks.

0

Expert Reply:

Hi Allen,

The Thule Van Locks part # TH309833 cannot be installed on the inside of the van doors. The mounting bases must be completely flat and level with each other and the inside of van doors usually has recessed panels, weather stripping, etc. that make them uneven. If this is installed on the inside of the van door, you can't unlock or lock it from the outside, so you would need to have the key inside just to get out. If it was locked and you were outside the van, it couldn't be unlocked until you got in through another door in the van that didn't have the Van Lock on it which would be very inconvenient and time consuming.

Thule does make an interior van lock called the Cab Lock that is designed to be installed on the inside of the van doors and secure them. At this time, we don't carry the Thule Cab Lock, but it is available on their website.

What kind of van are you wanting to install locks in?

expert reply by:
0
Claire H
Allen B. profile picture

Allen B.

11/11/2026

Thanks for reply, Claire. I THINK I understand all the ins/outs of the Thule lock. Assuming all surfaces are flat and level with each other, I don't see why it wouldn't work inside. Do you agree with that so far? As for the locking myself inside, that is exactly what I want. What I also understand is that the parts of the Thule normally can be closer together if mounted as usual on outside. They won't rub. If mounted on inside, the parts would have to be slightly positioned away from each other (more of a gap) because opening of the doors might make them rub. Make sense? If you think about it, you'll see what I mean. Just increasing the gap about 1/8" should do it and still allow the sliding part to lock. Get one in hand and play with it. Maybe it'll be telling. The van is a 2027 Chevy Express cargo. Body shape hasn't changed in years. I had one maybe 10yrs ago and I know there are flat spots I can use. Guess I should've explained my application. I have a wide long ramp to load a Harley. Once these are secured inside, I hit the road and unload when I get somewhere. Sometimes I have to stay somewhere overnight so I lock up the van back/side doors from inside and turn on alarms. Someone can try to enter but a device inside across doors like the Thule will give them added trouble. I'll check out the Thule inside lock again but as time permits, check out the lock with an open mind. I'm pretty sure Thule wants to simplify things for the vast public's application. I'm just weird. Ha. Thanks, Allen Breaux

Claire H. profile picture
Etrailer Expert

Claire H.

11/18/2026

@AllenB There isn't a lot of information published about this lock and from what I can see about its installation it needs to be installed in a way that their outer span remains 150mm. If the gap is increased by 1/8" it could reduce the remaining engagement length of the sliding cover and may prevent the internal lock latch from clicking shut if it's wider than the 150mm template. We haven't installed these locks here and there's very little information about them available, so reaching out to Thule directly may be your best option.

Product Page this Question was Asked From