Will K-Source Snap and Zap Tow Mirror for 2026 Chevy Colorado Scratch Truck Mirror
Updated 11/09/2026 | Published 11/03/2026 >
Question:
How is the wear and tear on the factory mirrors? Does installing and removing them cause any scratches or other damage?
asked by: James G
Expert Reply:
Hey James, this is a really good question because the potential for scratching mirror housings is the only real downside to the K-Source Snap and Zap style mirrors like the part # KS53NQ. We had the chance to play with these and a few other mirrors and what I found was that if you were a little careless with how you put the mirrors on and off you could get some light scratching that at worst could be buffed out. But if you were careful you would be able to avoid that. It also REALLY helps if you keep the mirror and the mirror housing of the vehicle as clean as possible. What are you planning on towing?

Adrien C.
11/5/2026
Mine work great… They have rubber along the backside that acts as a cushion between the factory mirror and the add-on mirrors… I have only used them twice so far and have gotten no scratches or damage to my factory mirrors. These were installed on my 2026 Colorado Trail, boss. I am very pleased with them. I joked that they look like “tough guy mirrors“ but they definitely accomplish being able to see Beyond the trailer being towed. There is nothing I can think of that should be changed. Just all around great product.


Joseph C.
11/5/2026
Jameson C. Is correct. If you are careful they shouldn’t leave any significant scratches. Personally I installed them once and leave them on. I pull a narrow trailer and without them I can’t see the trailer until I back up turning but with these I see it at all times. Let’s face it, the Colorado stock mirrors are pathetic for pulling a trailer. The only downside I see is that they are easy to put on but they come off easy also so if someone wants them they can go by-by in about 30 seconds. If a get a few light scratches I’m okay with it. The advantages out way scratches only you will know are there.

Product Page this Question was Asked From
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
- Towing Mirrors
- Snap-On Mirror
- Manual
- Pair of Mirrors
- Custom Fit
- Fits Driver and Passenger Side
- K Source
more information >
Continue Researching
- Q&A: What K Source Towing Mirrors will Fit My 2023 Chevrolet Colorado?
- Q&A: Recommended Towing Mirrors for a 2025 GMC Canyon AT4
- Q&A: Will The K-Source Snap & Zap Custom Towing Mirrors Fit A 2020 GMC Canyon Elevation?
- Q&A: Towing Mirrors for 2025 Silverado 1500
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Will K-Source Snap & Zap Custom Towing Mirrors Fit 2024 GMC Canyon Denali
- Q&A: Will The Trailer Hitch For A 2026 Lexus RX350h Interfere With The Liftgate Kick Sensor?
- Q&A: What is the Difference Between the Curt Rockerball # C40047 and # CU46FR?
- Article: How to Measure for Trailer Hitch Drop
- Article: RV Pre-Departure Checklist
- Article: How to Level a Travel Trailer in 3 Steps
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Towing a Trailer? Let's Talk About Brake Controllers



Rich
11/5/2026
I tried other mirror extenders and they looked hideous. These snap right on and actually look like a factory mirror on the truck. I did not have any problems with scratching bending or damaging the existing plastic mirror housing. I moved onto a bigger truck so I don’t need them anymore but they work perfect for my 2024 Chevy Colorado Trail Boss