Will Solera 18 Volt Conversion Kit Work with 18 Foot Solera Awning Fabric

Updated 10/14/2026 | Published 10/12/2026

Products Featured in This Question

Replacement 17'1" Fabric for 18' RV Awning - Universal - Black Fade

(3)

$350.82

Solera 18V Electric RV Awning Conversion Kit - Battery Powered - 69&quot Arms - Black

(9)

$835.49

Question:

looking to replace manual awning on 2007 fleetwood Bounder 38P Im looking at the 18v solera electric conversion kit LC434729. And I need new fabric LCV000334415. do you agree with these options?

asked by: chris a

Expert Reply:

Hey Chris, yes both the two part numbers will work great together. The Solera 18 Volt Electric Conversion Kit part # LC434729 will work great with the 18 foot fabric kit part # LCV000334415 that you referenced as well but you will want to make sure you have an 18 foot awning roller currently. This would need to be measured between the awning arm centers. Do you have a roller already?

expert reply by: Jameson C

Chris

10/13/2026

yes i have a a dometic 8500 848D x 18

Jameson C.

10/13/2026

@Chris it will definitely work with that!

Chris

10/13/2026

I'm concerned about the awning going over the slide and how much it could be adjusted,after its extended. There is going to be very little clearance between the roller and the stop arm on the slide topper. Has this been installed on a bounder 38P before?

Jameson C.

10/13/2026

@Chris How much clearance do you have now between the current awning arm and the slide out? It probably has been installed on your Bounder before but we don't have any feedback from a customer I could check with.

Chris

10/14/2026

about 2-1/2 inches to the top of the slide topper stop arm. if this could be repositioned I could gain several inches

Jameson C.

10/14/2026

@Chris when you say repositioned do you mean if the awning arm could be moved over slightly?