Distance from Hitch Pin to Gusset on Bottom of B and W Tow and Stow Pintle BW77BR
Updated 09/21/2026 | Published 09/16/2026
Question:
what is the measurement from the triangle strut on the 2.5inch to the center of the hole of the pin
asked by: Ron K
0
Expert Reply:
Hey Ron, on the B&W Tow & Stow Pintle Hook # BW77BR that you referenced the distance between the hitch pin hole and the gusset that runs along the bottom of the shank is 3-7/8 inches. Do you have a tight clearance situation?
expert reply by:
Jameson C
0
B and W Tow and Stow
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
B&W Tow & Stow Pintle Hook with 2" and 2-5/16" Balls - 2-1/2" Hitch - 10K/21K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2-1/2 Inch Hitch
- 21000 lbs GTW
- Built-In Pintle Hook
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Distance From Center Of Hitch Pin Hole To Center Of Hitch Ball On B&W Tow & Stow Pintle Hook
- Video: A Closer Look at the B&W Tow & Stow Pintle Hook for 2-1/2" Hitches
- Shop: B&W Tow & Stow Pintle Hook with 2" and 2-5/16" Balls - 2-1/2" Hitch - 10K/21K
- Q&A: Looking For Locking Pins For My B&W Tow And Stow Pintle Hook
- Q&A: Recommended Pin Lock for a B&W Tow & Stow Pintle Hook Ball Mount
- Q&A: Recommended Locking Pull Pins and Hitch Pin for a 2-1/2 B&W Tow & Stow Pintle Hook Ball Mount BW77BR
- Q&A: Locking Pin Sert For B&W Tow and Stow 21K Adjustable Ball Mount
- Q&A: Recommendation for Ball Mount with a 9 Inch Drop
- Q&A: Recommended Ball Mount for a 2022 Ford F-350
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: What Do I Need To Tow A Trailer?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Ron K.
9/18/2026
rock tammers