bing tracking image
Q & A Icon

Can e33KV Be Installed Backwards?  

Updated 09/08/2026 | Published 09/03/2026

Question:

I wanted to confirm that you can install this electric jack with the front of it installed facing the front of the trailer vs the tow vehicle. I have limited clearance when raising my hatch on my LC250 and my current setup has the electric jack installed like I mentioned above. thx

0

Expert Reply:

Hey Tim!

Yes, the etrailer Electric Trailer Jack w/ Tongue Weight Scale # e33KV can be installed with the front of the jack facing toward the trailer instead of toward your tow vehicle. The mounting flange allows you to rotate the jack during installation, so mounting it this way is perfectly fine and can be a good solution when rear hatch clearance is tight.

The main thing to check is that you still have enough clearance around the jack head and that the power wires can comfortably reach your trailer's 12V power connection without being stretched or pinched.

Since your current jack is already mounted this way to clear the hatch on your LC250, you should be able to install the # e33KV in the same orientation. If you'd like, send me a photo of your current setup and I can take a look at the available clearance for you.

expert reply by:
0
Jerry B

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>