bing tracking image
Q & A Icon

Replacement Coupler For A Crack Fill Machine  

Updated 08/25/2026 | Published 08/19/2026

Question:

looking for a flat mount trailer coupler for a crack fill machine. I double the loaded capacity is over 5 ton, but will go higher to make sure. The bolt pattern on trailer is 3.5 center to center. Do you carry anything with this bolt pattern?

0

Expert Reply:

Hi Pam!

Unfortunately, all the flat-mount couplers we carry use the 4-1/2" on center bolt pattern. This pretty much the standard for trailer use and all the options we carry abide by that. You may be able to find one else ware, but if I were in your situation, I would see about drilling new holes so something like the # DM69FR could be mounted on it. Even if you don't go with it, the bolt pattern will be a lot easier to find.

The only other option we have would be to weld on something like the Demco Trailer Coupler w/ 5-Position Adjustable Channel - eZ-Latch - Black - 2-5/16" Ball - 21K # DM6125-81. This still has plenty of capacity and has the added convenience of the coupler being adjustable, but it would be more difficult to install.

Out of cusriosity, what are you pulling this with?

expert reply by:
0
Lazer S

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>