TorkLift Camper Tie Downs, SuperHitch And Hitch Extension For 2026 Ford F-350 Crew Cab DRW Long Bed
Updated 06/11/2026 | Published 06/10/2026 >
Products Featured in This Question
Question:
Just want to verify I ordered the right parts. Truck: 2026 F350 CREW CAB DRW 7.3L FX4 XLT 8BED CAMPER: 2019 LANCE 975 PARTS ORDERED: TL27CR TL39NR Planning on ordering: TLS9529-2-LK I also need a hitch extension but Im not sure what length, the camper hasnt been delivered yet but it is a 2019 Lance 975 with the ultradeck plus bumper, the boat im towing has about 4inch of space behind the hitch ball to the stowed trolling motor, id like to be able to open the camper door without unhitching the boat, its only a 16foot aluminum boat with a 50hp merc outboard probably ~150 tongue weight. Any suggestions would be appreciated. Thanks
asked by: Philip
Expert Reply:
Hey Philip, thanks for reaching out. This is going to be a super slick setup.
Yes, you are good to go with what you ordered. The TorkLift Tie Downs # TL39NR are e exactly what you need for your 2026 F-350 Crew Cad long bed dually, and they are specifically made to work with the # TL27CR SuperHitch.
The FastGun Turnbuckles # TLS9529-2-LK are a great choice too. You'll have everything secured and locked up tight.
As far as the hitch extension, it's hard to say exactly how long you'll need without having the camper in the bed but my guess is you'd want to go at least 36" or 42". That should give you enough clearance to open the door without hitting anything. If I Were you, I'd lean towards the 42" # TLE1542. Better to have a bit of extra clearance than not enough. Plus, whatever ball mount you use will add a bit of extra length so you should be good to go with that.
If you want to measure before you pick up the camper, here is how:
1. Measure from the inside of the front of your truck bed to the outside face of the truck's rear bumper.
2. Measure the camper's overall floor length from the rubber bumpers at the front to the outside edge of the rear bumper.
3. Find the difference between these 2 figures by subtracting. The difference is the length of the extension that you need. In this case, you'll want to factor in the door width too.
Got any trips planned once you pick up your Lance camper?
Product Page this Question was Asked From
TorkLift Tie Downs - Custom Frame Mount - Front and Rear
- Truck Camper Tie Downs
- Front Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
Continue Researching
- Q&A: What Torklift Tie Downs Fit a 2022 Ford F350 with a 6.5ft Bed?
- Q&A: TorkLift SuperHitch and Tie-Downs For a 2024 Ford F-350 Super Duty
- Q&A: Will Hellwig Adjustable Big Wig Rear Anti-Sway Bar Fit 2024 Ford F-350 4X4
- Q&A: TorkLift Tie Towns For A 2024 Ford F-350 With 8 Foot Bed
- Q&A: Recommended Roof Rack Crossbars for Lance Cab Over Camper With Factory Tracks
- Q&A: TorkLift Tie Downs For A 2022 Ford F-250 With Running Boards That Extend Past The Cab
- Q&A: 2024 Ford F-350 Super Duty TorkLift SuperHitch and SuperTruss Recommendations for In-Bed Camper
- Article: Trailer Wiring Diagrams
- Article: Best Air Bag Suspension 2025
- Article: How to Mount a Truck Bed Camper
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)


