Replacement Screen for Ventline Ventadome Trailer Roof Vents w/a Switch and Manual Crank
Updated 05/30/2026 | Published 05/28/2026
Products Featured in This Question
Question:
I have a 2019 jAYCO Micro 171BH. The tabs that hold the screen in on the Ventline bathroom vent are gone, so I need a replacement for the screen and the bracket that holds it in place. It appears you have to remove the four screws holding the bottom of the vent in place and the new screen bracket. This is just a basic manual crank open screen with a rocker switch. Will this product work for my vent? Thanks...
asked by: Jim H
(click to enlarge)
Expert Reply:
Welcome back Jim and thanks for that picture. The Replacement Screen Frame item # BVC0573-41R looks exactly like the one in your pictures. It's definitely what you need to replace the bracket with the tabs and switch, along with the screen.
Too replace yours, you'll start by taking out the screw in the turning handle and removing it. Then you'll push in on the side tabs, top and bottom in your picture, to remove the bracket. Before you take it all the way off you'll want to unplug or disconnect the wires.
Matching whites is always fun and I'm colorblind, but I wanted to let you know we also have this bracket/screen combo in Birch White item # BVC0573-31R.
These screens are compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119.
If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Polar White
- Accessories and Parts
- RV Vents and Fans
- Roof Vent
- Screen
- Ventline
more information >
Continue Researching
- Shop: Replacement Screen Frame with Screen, Rocker Switch, and Wire for Ventline Roof Vents - Polar White
- Video: The Low-Down on the Replacement Screen Frame for Ventline Ventadome Trailer Roof Vents
- Shop: Replacement Screen Frame for Ventline Ventadome Trailer Roof Vents - Birch White
- Q&A: Replacement Screen for Ventline Ventadome Trailer Roof Vents Model VD0434
- Q&A: Correct Replacement Parts for a Ventline VD0434 Roof Vent
- Q&A: Replacement for Thetford Midel 42055 In 2017 Thor Vegas
- Q&A: Replacement Pinion Spur Gear for Power Gear Slide Out on 2007 Fleetwood Providence
- Q&A: Which MORryde Safe-T-Rail Fits Jayco Jay Feather 27MK
- Q&A: What Breakaways Does The Fastway Zip Coiled Trailer Breakaway Cable w/ Plunger Pin Work With?
- Q&A: Replacement Screen For Ventline VD0434
- Article: Trailer Lighting Requirements
- Article: How to Replace or Install an RV Roof Vent
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Bill
5/30/2026
Yes, i used this for the same reason you did. My screen tabs were broken in our 2016 Bullet trailer. You do have to knockout the fan switch knockouts as the frame is made for vents with and without a fan, but that was no problem. Its a straight forward replacement and worked perfectly.