Replacement Wet Bolt, 2-1/4" Shackle Strap, and Bushings Kit for a Tandem Axle Trailer
Updated 03/19/2026 | Published 03/12/2026
Products Featured in This Question
Question:
I have a 2018 Forest River Heritage Glen Hyper Lite 23RBHL. The bushings are worn out on the spring next to the shackle. It has 3500 Dexter axles. Could you tell me the proper size bolt and bushing?
asked by: Maurice A
Expert Reply:
Hey Maurice, welcome back! Your 2018 Forest River Heritage Glen Hyper Lite 23RBHL should have the standard 9/16" inner diameter and 11/16" outer diameter bushings.
The MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR46ZR you purchased has the same size 9/16" ID and 11/16" OD bushings in it.
Are you also interested in replacing your leaf springs since you're going to have your entire suspension taken apart?
If you are, I would just need you to measure one of your leaf springs from the center to center of the mounting holes with the weight of your trailer off of the springs. I'll also need to know how many leafs your springs currently have.
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Battery Tray with Strap - Group 31 Battery - 14" x 8-3/8"
- Shop: Attwood Battery Tray with Hold-Down Straps for 27/27M Marine or RV Batteries
- Shop: Commercial Grade Battery Box for Group 4D Batteries - Vented
- Shop: RV Battery Tray for Redarc Alpha150 Lithium Battery - Steel
- Q&A: Looking For New Leaf Springs And Hardware For 2017 Interstate 7k Enclosed Trailer
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Q&A: Is It Worth Upgrading to MORryde AllTrek 4000 From CRE3000 on Jayco 5th Wheel Trailer
- Q&A: Want To Upgrade From CRE 3000 Suspension On 2023 Grand Design Momentum 336M
- Q&A: How to Determine Which MORryde Premium Rubber Suspension Kit Fits 2020 Forest River Wildwood 27RKSS
- Article: How to Raise Your Travel Trailer Height
- Article: Spring Towing Readiness Checklist
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Trailer Wiring Diagrams
D H.
3/18/2026
I purchased the MORryde Suspension Upgrade Kit for Tandem Axle Trailers a couple months ago. The shackles are at least three times thicker and the greasable bolts not only quiets the suspension but makes it lifetime. Should be greased about every 2500 miles. I reversed the bolts so I could easily get to them from the inside, that is just personal preference. Remember the Bolts that mount to the frame shackle have splines back them up or they will strip out. I also recommend the MORryde equalizer for your wheel base it completes the upgrade. As for the springs just inspect them closely if they are not flat should be fine. Some people carry a spare when traveling especially to Alaska.