Availability Of Replacement Lippert/Power Gear Leveling Cyliners On 2000 Fleetwood Bounder 39z
Updated 01/09/2026 | Published 01/04/2026
Products Featured in This Question
Question:
Morning, I need to replace the two rear Lipprt Leveling Cynilnders on our 2000 Fleetwood Bounder 39z Here is the infomraiton I can read from those cylinders: Passenger side Rear 500082H 011026664 Driver side Rear 500082H 0201285926 Will this part replace both? . Replacement Hydraulic Jack Assembly for Lippert Level Up RV Leveling System - Lead Leg - 14,000 lbs Part Number: LC83ED Please advise at earliest opportunity Thank You
asked by: Carl F
Expert Reply:
Hello Carl, thanks for reaching out. Those part numbers you provided are for old Power Gear jacks and unfortunately that leveling system has been discontinued and is no longer available. I ran those part numbers by my contact at Lippert and they confirmed this. They also confirmed the Lippert # LC83ED jack you mentioned is not a suitable replacement. If the old cylinders have failed, the only option would be to replace the entire leveling system. We do have some solid options for that. Take a look at the following:
- Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Bluetooth Control - 6-Point Set # LC675817
- Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set # LC358590
(click to enlarge)
Product Page this Question was Asked From
Replacement Hydraulic Jack Assembly for Lippert Level Up RV Leveling System - Lead Leg - 14,000 lbs
- Accessories and Parts
- Camper Jacks
- Jack Assembly
- Lippert
more information >
Continue Researching
- Q&A: Replacement Hydraulic Jack Assembly for a Gen 1 Lippert 5th Wheel RV Leveling System
- Q&A: Replacement Jacks For Lippert Level Up Hydraulic Leveling System On a 2015 Keystone Montana
- Q&A: Is The Replacement Jack Assembly LC25AF Able To Replace Either Side?
- Q&A: Identifying Lead/Follow Leg on Lippert Level Up RV Leveling System
- Q&A: Recommended Replacement Gen 1 Lippert Level Up Front Jack Leg
- Q&A: Replacement Front Hydraulic Jack Assembly for Gen 1 and 2 Lippert Level Up RV Leveling Systems
- Q&A: What Replacement Hydraulic Jack Assembly do I Need for My Generation 1 14K Right Side Leg?
- Article: Can You Flat Tow a 2024 GMC Canyon?
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Trailer Wiring Diagrams
- Article: What Is a Supplemental Braking System?
- Article: How to Install E-Track in 3 Easy Steps
- Article: Gooseneck to 5th Wheel Adapters
Carl F.
1/8/2026
Jesse, That will be a large effort but potentially that may work. If I did I would choose the 4 point system to match with what our RV currently has. Here are the Front/Rear part numbers and dimensions in order for me to proceed FRONT: 500082H A=20.75" - Please reference PowerGear chart for this dimension. Rated for 9K lbs REAR: 500385 replaced by 500385TH or LIPPERT #359495 A = 22.37" - Please reference PowerGear chart for this dimension. Rated for 12K lbs Both have a 9" pad. The Fleetwood Bounder 39z GVWR is 24,850 lbs I need to be certain those jacks with also fit in the mounting available on the Fram to the dimensions specified by Power Gear - Lippert. Let me know if this matches up and if it does is this a model that is up to date? Thanks Carl