Height Setting For B&W Companion In 2026 Ram 2500

Question

Question:

I just put the bottom piece of my companion slider in today, wow was that heavy! What height should I adjust the pivot points to for a 2026 2500 ram? Is the 19” height my best option? I don’t want to mess my new truck up!

asked by: Ryan N

0

Expert Reply:

Hi Ryan!

Glad to hear you got the base installed. It's definitely not easy with how much it weighs, but hey, that's because it's beefy and built to last! ^___^

As to your question, there are a few variables. Believe me, I would like to just tell you how to set it so you can be on your way, but it isn't that cut and dry.

First you will want to level your trailer and measure from the ground to the bottom of the pin box. Once you have that measurement you will want to measure from the ground to the head unit of your # BWRVK3670 and get it as level as possible using either the 17", 18", or 19" height setting.

If you do not have enough adjustment to get your trailer level you will also need to adjust the height of your pin box while trying different height settings on the hitch to find the perfect combination.

Keep in mind you will want to have between 5"-6" clearance between the trailer and the top of the bed rails to avoid any contact. I included a couple diagrams that will help with the process.

Out of curiosity, what kind of 5th wheel are you going to be towing?

expert reply by: Lazer S

0

Trailer To Bed Clearance
(click to enlarge)

B&W Companion OEM 5th Wheel Hitch Height Settings
(click to enlarge)

Ryan N.

12/5/2025

2016 cedar creek silver back, model 29re

Reply

Lazer S.

12/5/2025

@RyanN Cool camper! Looks cozy. ^___^ Was kind of hoping I could find the hitch height, but I wasn't so lucky. It will be a little bit of work, but you will need to go through the steps I have listed above. I'm sure you can get it done in no time though!

Reply

Answer 1

If your rails are ISR (Industry Standard Rails) then yes, you can easily swap out your 16k sliding 5th wheel hitch for a Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000lbs #C16541. An easy way to see if the rails are ISR is to…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 5

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Hello Quang, thanks for reaching out. Yes, you can use the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1094 on both the front and rear of your 2023 Jeep Wrangler. Also, you can indeed use them with SumoSprings helper…

view full answer...

Answer 11

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 12

Hi Ryan! Glad to hear you got the base installed. It's definitely not easy with how much it weighs, but hey, that's because it's beefy and built to last! ^___^ As to your question, there are a few variables. Believe me, I would like to…

view full answer...

Height Setting For B&W Companion In 2026 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching