Can Gen-Y Adjustable 2-Ball Mount 325-GH-224 Be Used For Flat Towing?

Question

Question:

Can this used on a Class A coach with a Blue Ox flat tow system and a bike rack at the same time?

asked by: Brent

0

Expert Reply:

Hello Brent, thanks for reaching out. Yes! The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-224 can absolutely be used for flat towing. You can put the tow bar in the lowermost receiver, then put your bike rack in the uppermost receiver. We actually had a rep from Gen-Y here for a visit a while back and I asked her this specific question about using their ball mounts for flat towing. The answer was an enthusiastic yes lol

expert reply by: Jesse M

0

325-GH-224
(click to enlarge)

Jesse M.

12/1/2025

Hey Brent, how did things go using the Gen-Y adjustable ball mount with your Blue Ox flat tow setup and bike rack? Your experience could point others in the right direction who want to carry both at once.

Brent

12/9/2025

@JesseM The setup is perfect. The hitch fits the RockyMount bike rack great and the drop was a great match for my BlueOx tow bar, making almost level when connected to the car. I added a 12-inch BlueOx extension to the tow bar to make sure there was enough room between the bike and car when turning. Also added a couple anti-rattle devices to take up some play in all of the connections. I've got some pictures that I can share.

Jesse M.

12/10/2025

@Brent Thanks for the update, Brent. Really glad to hear everything came together so well. Sounds like you dialed in the setup perfectly with the drop, extension, and anti-rattle gear. Great call making sure you’ve got that turning clearance, too. I’d definitely love to see those pictures whenever you want to share them! There is no way to add pictures to the comments on here (yet) but you can feel free to email those to me. My email is [email protected]

Answer 1

The Lubrimatic marine wheel bearing grease you mentioned #L54FR uses a calcium sulfonate base. Grease that uses that type of base is indeed compatible with lithium complex grease, according to the compatibility chart you mentioned. To see the chart,…

view full answer...

Answer 2

According to Dexter Axle, the attachment bolts for a 12 x 2 brake assembly should be torqued to 25-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn close…

view full answer...

Answer 3

I would highly recommend replacing your worn out Fulton Fold-Away Coupler Hinge Rubber Plugs #F500705. This is going to prevent metal to metal contact between the hinge pieces which will help prevent premature fatigue of the metal. We do not sell…

view full answer...

Answer 4

Hey Randy! For the OEM prep package you'll need to reach out to a Ram dealer, but I can help you out with an underbed system for your 2026 Ram 2500 if you aren't dead-set on getting the exact same as the OEM. The closest we have for your…

view full answer...

Answer 5

The horizontal distance between the hitch pin hole and the tallest point of the Shocker Hitch Impact Max Cushioned Ball Mount #SHK34RR is 4-1/2" to the first hitch pin hole and 5-1/2" to the second hitch pin hole (see attached). I also got…

view full answer...

Answer 6

If the shackles are flipping the wrong direction frequently that typically means the leaf springs are too short, the hanger spacing is too big, or the shackles are too short. Most of the time it's somebody changed leaf springs and just went with…

view full answer...

Answer 7

Hello again Brett, Congrats on the new truck! I am pretty sure that the connector on the back of your 2024 Ram 1500 Classic is a 7-way connector, you are supposed to count all the slots and include the piece in the middle. I attached some pictures…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

Hello Brent, thanks for reaching out. Yes! The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers #325-GH-224 can absolutely be used for flat towing. You can put the tow bar in the lowermost receiver, then put your bike rack in the uppermost…

view full answer...

Can Gen-Y Adjustable 2-Ball Mount 325-GH-224 Be Used For Flat Towing?

Product Page this Question was Asked From

Continue Researching