Looking For Trailer Hitch To Haul Motorcycle Behind Fleetwood Jamboree RV On Ford E350 Chassis
Updated 11/13/2025 | Published 10/16/2025
Products Featured in This Question
Question:
Looking for a hitch to haul my 450lb motorcycle behind my Fleetwood Jamboree RV on a E350 chassis. Will this one work okay?
asked by: Arian
Expert Reply:
Hello Arian, thanks for reaching out. We will have a hitch option for you, but the Curt Trailer Hitch Receiver # 13053 is really only intended for passenger van models. It may not fit RV models but you can check to see if your RV has holes on the rear frame members that are 38-5/8" apart. If so, you can use the # 13053 hitch.
If not, your best option would be to use a universal multi-fit hitch like the Draw-Tite # 5350. This has adjustable flanges that can fit frames between 24" and 46" wide. It has a 2" receiver and 5,000 lb towing capacity and 500 lb tongue weight capacity
Do you know the frame width of your RV? Do you have a trailer for your motorcycle? How will you be carrying it?
(click to enlarge)
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement For Lippert 175226/12656 4-Point Leveling Control Brain
- Q&A: Which Hitch for 1999 Ford E150 Passenger Van Sticks Out Least Curt or Draw Tite
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Crossbeam/Rod is Used for etrailer 2-Speed 25K Jacks
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Wheel Fitment for 5/8" Studs on Disc Brakes
- Q&A: Parts Needed To Add 7-Way Connector To 2011 Ford E-350 Without Factory Towing Package
- Q&A: Does Draw Tite Hitch 75703 Fit with Full Sized Spare
- Article: How to Measure for Trailer Hitch Drop
- Article: Determining Trailer Tongue Weight
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Jesse M.
11/13/2025
Hey Arian, what did you find when you checked the frame width on your Jamboree? Once you know that, it’ll be clear whether the Curt or the multi-fit hitch is the better match. Let me know what you measured—I can help confirm the right fit.