Recommended 4" Offset Ball for a 2018 Ford F-250 w/ a B&W Gooseneck Hitch
Updated 09/29/2025 | Published 09/05/2025
Products Featured in This Question
Question:
Good Afternoon. I am currently running a 2018 Ford f250 long bed, with a bandw gooseneck assembly. I found the 2 and 5 sixteenths, balls. Did they make with the 4 inch offset? And was curious if yall had ever heard of anybody running them forward to gain wait on the front axle
asked by: Joshua T
Expert Reply:
Yes, they do Josh. Since your 2018 Ford F-250 has the B&W Turnoverball item # BWGNRK1116, you'll want the 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitches item # BWGNXA4085.
We've talked to B&W before about using the 4" offset ball item # BWGNXA4085 backwards and they've said not to do it. Their answer has been that the offset ball is only designed to be used as an extension to give you 4" of additional clearance and not the other way around. The holes in the center of the shank and it'll fit though.
What kind of trailer are you pulling?
To make towing with a gooseneck trailer easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C57010. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your gooseneck trailer easier and more convenient.
Product Page this Question was Asked From
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Flip-Over Ball
- 7500 lbs TW
- 30000 lbs GTW
- Wheel Well Release
- Spring-Loaded Loop
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Gooseneck Hitch
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Q&A: Is There A Soft Start For The Dometic FreshJet 5 With Heat Pump FJX5557EHPWHCS?
- Q&A: What Air Bags Work with the B&W Turnoverball Part # BWGNRK1116 on a 2018 Ford F-250
- Q&A: How do I Know if I have the OEM Prep Package (Puck System) in the Bed of My Truck?
- Q&A: What B&W Turnoverball Gooseneck Hitch Fits A 2019 Ford F-250 Lariat Without Factory Prep Package?
- Q&A: Aftermarket Puck Kit Recommendation for a 2022 Ford F-250 Super Duty
- Q&A: Is Drilling Required to Install Pace Edwards Full-metal JackRabbit Hard Tonneau Cover
- Q&A: Do You Know the Difference Between a 11033 Hub and My 11033L Hub?
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Holiday 2025 | Best Gifts for Towers
- Article: Trailer Wiring Diagrams
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: How to Measure a Trailer Axle
Jerred H.
9/29/2025
Hey Josh, did you have a chance to try out the 4-inch offset ball with your Ford F-250? I'm curious to know how it worked for you, as it could help others considering a similar setup.