Trailer Cover Recommendation for 20 ft V-Nose Trailer

Question

Question:

I am about to buy an 8.5 x 20 v-nose trailer that is 81 tall. I need a cover for the entire trailer. What is the best product for this? Would I also need to cover the tires separately if I cover the entire trailer? The trailer will be sitting for long periods.

asked by: Bernardo P

0

Expert Reply:

Hey Bernardo, for a trailer that length I would recommend the Adco RV Cover for Travel Trailers part # 290-74840 which is for trailers that match your dimensions. The nose of this has adjustment straps to allow you to tailor the front of the cover to match the nose of your trailer.

expert reply by: Jameson C

0

Jameson C.

9/29/2025

Hey Bernardo, did the Adco RV Cover work well for your trailer? I'm curious to know because it could help others looking for a similar solution.

Answer 1

The best brand of trailer cover we carry is Adco, the All-Climate Cover or the SFS AquaShed Cover in particular. These covers will both do an excellent job of keeping your trailer protected from the elements. They have polypropylene sides for maximum…

view full answer...

Answer 2

The Adco SFS AquaShed Cover for Bumper Pull Trailer part #290-46004 would be an excellent option for a 7 x 14 V-Nose Enclosed Trailer. The Adco SFS AquaShed Cover for Bumper Pull Trailers is actually designed for horse trailers but it will work well…

view full answer...

Answer 3

Hey Tim! For a boxed cargo trailer with the body sitting over most of an A-Frame tongue then you'll want to use the Adco SFS AquaShed Trailer Cover #290-46004 because it's tailored for that style of trailer. If you have a different style…

view full answer...

Answer 4

Hey Chris! The black wire on the etrailer Electric Trailer Jack #e23ZV is just a ground wire. Realistically you can ground it however you want but I would say running it to the frame with a self-tapping screw as indicated in the instructions is the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Trailer Cover Recommendation for 20 ft V-Nose Trailer

Product Page this Question was Asked From

Continue Researching