What Info is Needed to Pick Out Replacement Slipper Spring for Harbor Freight Trailer
Published 08/26/2025
Question:
Hi….looking for slipper springs for the older 12” tire 40x48 haul master trailer Harbor Frieght . There must be millions of these trailers out there so I expect you know the ones I need. The trailer is away from my location but I could get measurements if you need them. Thanks, Steve Go Army!
asked by: Steven
Expert Reply:
Hey Steven, I would need you to get me the dimensions of your springs to see what you'd need as we don't have a way to look up what your trailer has. Especially since its a slipper setup which has a bit more variance.
If you can get me the length, width, and the axle capacity that would be what I would need.
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How Do The etrailer Single Axle Trailer Fenders Install?
- Q&A: Hanger Kit to Install Leaf Spring on Trailer that Has Slipper Springs
- Q&A: Is Drilling Or Trimming Required To Install The EcoHitch EH72HR On A 2025 Hyundai Ioniq 5?
- Q&A: Replacement 4.80-12 Trailer Wheel and Tire for Jet Ski Trailer
- Q&A: What Leaf Spring Should Be Used With 2,000 lb Axle?
- Q&A: Correct Replacement Leaf Springs for Malone Microsport Trailer
- Article: Trailer Tire Sizing
- Q&A: Can I Change My Trailer Coupler from a 1-7/8 Inch Coupler to a 2 Inch Coupler
- Article: Trailer Lighting Requirements
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Replace Trailer Leaf Springs in 5 Steps
Steven
8/26/2025
Thanks…I will do that and send it on. Thank you for your quick reply! Steve