Leaf Spring Recommendation for Single 3,500 lb Axle Converted to Tandem Setup
Updated 09/02/2025 | Published 08/09/2025 >
Products Featured in This Question
Question:
I currently have a boat trailer with a single 3500 lb axle. Boat weighs 2400 lbs. TaIler estimated at 600 lbs. I only tow it long distances and would like to convert the trailer to tandem axle for better handling and redundancy if a problem arrises while towing. What would you reccomend each axle be sprung at when it is a tandem. Could you please provide a materials list. Thanks. Dale
asked by: Dale T
Expert Reply:
Hey Dale, I would go with a 2,000 lb rated spring like the etrailer part # e77SR if you were to switch to a tandem setup. This will still be more capacity than needed overall but won't be so overkill that ride quality suffers.
Then for a hanger kit the part # AP233-H248 would be a really great option that comes with everything you'd need to mount up a second axle and leaf springs.
To pick out a replacement axle though you would need to know the distance from hub face to hub face as well as the distance between spring seat centers.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: 2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs
- Q&A: Leaf Spring Recommendation for 1996 Calkins Boat Trailer
- Article: How to Raise Your Travel Trailer Height
- Q&A: Recommended Shackle Straps and X-Factor Crossmember Compatible w/ MORryde ALLTREK 4000 Equalizers
- Article: Where to Position the Trailer Axle?
- Q&A: Do You Have an Axle for My Smoker Hub Face 52" and Spring Center 43", 5 on 4 1/2" Bolt Pattern?
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Q&A: Raising Trailer Suspension To Clear Rear Leaf Spring From Hitting The Crossmember
- Q&A: What Is The Difference Between The etrailer e54SR And Dexter DX23CR Leaf Springs?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps


Jameson C.
9/2/2025
Hey Dale, did you find the tandem axle setup to improve your trailer's handling and provide the redundancy you were looking for? I'm asking because your experience could help others considering a similar upgrade.