Looking For 89" HF Axle With 5 on 4-3/4" Hubs
Updated 08/06/2025 | Published 08/03/2025
Products Featured in This Question
Question:
I am needing an axle: HUB to HUB = 89 Spring to spring = 74 But i need a bolt pattern of 5 on 4 3/4 Do you offer?
asked by: Jay K
0
Expert Reply:
Hello Jay, thanks for reaching out. We do have an axle that matches your specs, the Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs # e38GR. The hubs are sold separately from this axle, but we do have a compatible 5 on 4-3/4" hub. For that you can use the following:
- Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased # AKIHUB-5475-35-EZ-K
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Adding Hydraulic Disc Brakes to a 3,500 lb Boat Trailer
- Q&A: What Information Do You Need to Order a Correct Replacement Axle?
- Article: How to Measure a Trailer Axle
- Q&A: Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can 6k Trailer Axle Hub/Drum Fit on 5.2k Trailer Axle
- Q&A: Replacement Brake Assemblies and Hubs for 1960 Airstream Trailer
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?