Replacement Dust Cap for Hub With 2-3/4" Hub Bore
Updated 09/29/2025 | Published 05/15/2025
Question:
I need a dust cap. Where it fits into the axel appears to be 2 3/4 ID. It is an 8 lug wheel. Can you assist please.
asked by: Tod F
0
Expert Reply:
Hey Tod! The closest thing we have to 2-3/4" is the Fulton Grease Cap - 2.722" Outer Diameter - 1-5/16" Tall - Drive In # F001605. I'm not sure if you got a precise measurement or if that was just an estimate. I recommend measuring with a digital caliper # PTW2993 to find the exact fit. If you have a different measurement let me know in the comments below.
expert reply by:
Robin H
0
Fulton Grease Cap
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Fulton Grease Cap - 2.722" Outer Diameter - 1-5/16" Tall - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 2.72 Inch O.D.
- 2.72 Inch
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- Fulton
more information >
Continue Researching
- Q&A: Tool to Drive in 2.72" Hub Dust Caps
- Q&A: Replacement Inner Parts for Demco 12.5K Weld-On Actuator
- Q&A: Replacement EZ Lube Grease Cap For Trailer Hub on 4,400 lb Dexter Axle
- Q&A: Replacement Grease Seal And Bearing Kit For Lippert 5200-Lb Axle On RV Trailer
- Q&A: Correct Bearings, Seals, and Brakes for a Lippert 8,000 Lb Axle
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Q&A: How To Tell The Difference From Right and Left Electric Brake Assemblies
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?
Robin H.
9/29/2025
Hey Tod, did you have a chance to measure the axle with a digital caliper to find the exact fit for the dust cap? If you have a different measurement, I'm here to help you find the right solution.