Can Rivets Be Used to Install Polar Hardware Strap Hinge
Updated 09/26/2025 | Published 05/01/2025 >
Question:
My horse trailer tack room door has typical hinges fastened with rivets. These are heavy duty rivets different in size and strength as compared to the rivets that hold the rubber wall panels up. These hinge’s bushings are shot causing door to slump and drag when closing. 1. I must replace hinges as I see no way to new bushings? Correct? 2. If I replace hinges I see you recommending 10 screws … not rivets. Correct? Why not rivets?
asked by: Phil S
Expert Reply:
Hey Phil! I can't say for sure on the bushings but, based on my experience with trailer parts that is likely correct. The recommendation is for #10 screws because it is pre-drilled for the screws and your average person is likely using screws and not rivets.
You can certainly use rivets to install the Strap Hinge # PLR104SS if that works better for your application. If you take a look at the picture below you will see where another customer used different hardware for different holes. If you need anything else feel free to reply below.
Product Page this Question was Asked From
Strap Hinge - 5-1/2" Long x 3-1/4" Wide - Stainless Steel
- Trailer Door Hinges
- Strap Hinge
- Non-Removable Pin
- Stainless Steel
- 5-1/2 Inch Long
- 3-1/4 Inch Wide
- Bolt-On
- Polar Hardware
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Size Of Square Tube On Bigfoot Hydraulic Trailer Jack
- Q&A: Does Polar Hardware Strap Hinge Use Rivets and Screws for Installation
- Q&A: Replacement Door Hinge for Trails West Horse Trailer
- Q&A: Replacement for Discontinued Bargman 30-91-010 and 30-91-011 Tail Lights
- Q&A: What Drum do I Need to Replace My Lippert Drum with 696690 Stamped on it?
- Q&A: Replacement Screw and Nut for Bulldog 10K / 12K Square Trailer Jack
- Q&A: Will Removable Wheel # TV89FR Fit JX Model Trailer Jacks
- Article: Trailer Lighting Requirements
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision




Robin H.
9/26/2025
Hey Phil, did you decide to go with screws or rivets for your trailer door hinges? I'm curious to know how it worked out for you, as it could help others facing similar decisions.